Degradation Characteristics of Intermetallic Coating on Nickel Base Superalloy Substrate in Gas Ttairbine Blade
Authors:
- 1 September 1995
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 10 (5) , 987-1005
Abstract
In-service degradation of the mechanical properties (295-1223 K) and microstructure/chemistry in gas turbine blades made of CoNiCrAlY coatings and Rene 80 substrates has been studied by means of a small punch (SP) testing technique and scanning Auger microprobe (SAM). In SP tests, brittle coating cracks continuously and discretely propagated along the radial and tangential directions at 295 K and elevated temperatures, respectively. The ductility of the coating and substrate at 295 K was lowered during long time operation of the blades. The ductile-brittle transition temperature of used coatings was increased by 90 K, compared with that of unused ones while that of the substrate remained unchanged. From SAM analyses of the unused and used blades, it was found that oxidation and S segregation near the coating surface region profoundly occur in-service. The relationship between the mechanical property degradation and microstructural/chemical evolution near the coating surface is presented which serves as a data base for determining the remaining life of gas turbine blades.Keywords
This publication has 8 references indexed in Scilit:
- Thermomechanical Fatigue Behavior of Materials1993
- Small-punch and TEM-disc testing techniques and their application to characterization of radiation damageJournal of Materials Science, 1992
- Advanced Surface Coatings: a Handbook of Surface Engineering1991
- Hardening and intergranular embrittlement in neutron-irradiated ferritic alloysMaterials Science and Engineering: A, 1989
- Development of a further-miniaturized specimen of 3 mm diameter for tem disk (ø 3 mm) small punch testsJournal of Nuclear Materials, 1987
- Dynamic embrittlement of boron-doped Ni3Al alloys at 600°CActa Metallurgica, 1987
- Development of Small Punch Tests for Ductile-Brittle Transition Temperature Measurement of Temper Embrittled Ni-Cr Steels1986
- The development of a miniaturized disk bend test for the determination of postirradiation mechanical propertiesJournal of Nuclear Materials, 1981