Solid waste material reuse analysis: filling the road subgrade with riverway silt and sediment
Authors:
- 19 January 2022
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (23) , 35096-35109
Abstract
This study proposes to explore solid waste material (SWM) reuse of the riverway silt and sediment, and examines the impacts of chemical composition on road construction through sensitivity analysis. Considering the characteristics of silt mixture, it is necessary to investigate the modified materials to improve the mechanical feasibility for subgrade filling. In this study, the water content of riverway silt and sediments was found to be important to determine the selection and content of modified materials. Specifically, the riverway silt and sediment with low water content could be improved effectively with 6 to 8% lime. Compared to the original sludge, the improved mixture had better particle size and permeability, and the carrying capacity also grew 2 to 3 times. On the other hand, the reuse of riverway silt and sediment with high water content over 40% was provided with multiple schemes. Among them, the modification scheme of construction waste or garbage slag showed well mechanical properties and environmental benefits in the sensitivity analysis, especially for the high water content sludge modified by the mixture of garbage slag and lime. The California bearing ratio (CBR2.5) was 2 to 5 times higher than the original silt, which would promote the reuse of multiple solid wastes in road construction. Finally, this study puts forward engineering measures to prevent heavy metals from polluting the water and soil environment by silt-improved soil roadbeds, and the improved riverway silt and sediment roadbeds were proved to be safe and reliable for the environment during service.Keywords
All Related Versions
This publication has 46 references indexed in Scilit:
- Comparison of bioleaching and electrokinetic remediation processes for removal of heavy metals from wastewater treatment sludgeChemosphere, 2017
- Utilization of sediments dredged from marine ports as a principal component of composite materialJournal of Cleaner Production, 2017
- Use of recycled construction and demolition materials in geotechnical applications: A reviewResources, Conservation and Recycling, 2015
- Sequential anaerobic/anaerobic digestion for enhanced sludge stabilization: comparison of the process performance for mixed and waste sludgeEnvironmental Science and Pollution Research, 2014
- Impact of wetting–drying cycles on the microstructure and mechanical properties of lime-stabilized gypseous soilsEngineering Geology, 2014
- Physical properties and shear strength responses of recycled construction and demolition materials in unbound pavement base/subbase applicationsConstruction and Building Materials, 2014
- Road material basis in dredged sediment and basic oxygen furnace steel slagConstruction and Building Materials, 2012
- Application of sludge dewatered products to soil and its effects on the leaching behaviour of heavy metalsChemical Engineering Journal, 2011
- Utilization of fly ash for stabilization of marine dredged sedimentsEuropean Journal of Environmental and Civil Engineering, 2010
- Possible production of ceramic tiles from marine dredging spoils alone and mixed with other waste materialsJournal of Hazardous Materials, 2006