Evolution Characteristics of Coal Fractures under High-Temperature Coupling with Triaxial Stress
Open Access
- 24 July 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (30) , 45283-45296
Abstract
Underground coal fires pose severe hazards to safe mining and environmental sustainability, with fracture development in coal serving as critical pathways for oxygen supply and heat transfer. However, the dynamic evolution of fractures under coupled high-temperature and triaxial stress conditions remains poorly understood. In this study, bituminous coal samples from a fire-affected mining area in Xinjiang, China, were subjected to high-temperature treatments (200 and 400 °C) and subsequently loaded under triaxial compression (confining pressure 5 MPa) while being monitored by an industrial CT scanning system. Full stress–strain curves were obtained, and VG Studio MAX software was used to quantitatively analyze fracture morphology, volume, density, porosity, and 3D fractal dimension across five successive loading stages. The results reveal that temperature governs the mechanical behavior of thermally treated coal. With increasing temperature, the compaction stage shortens, elastic modulus decreases, and peak stress first increases then decreases, while the durations of plastic deformation and postpeak failure stages first shorten then lengthen. The porosities of RC, C200, and C400 coal samples at the first scan were 0.07%, 0.28%, and 0.70%, respectively, indicating that high-temperature treatment increased the initial porosity of the coal samples. Based on fracture density, porosity, and fractal dimension, fracture evolution is divided into three stages: smooth development, slow growth, and rapid growth. The 3D fractal dimension further confirms this staged evolution. These findings provide a theoretical basis for predicting fracture network evolution in coal fire zones and offer practical guidance for fire prevention strategies.Keywords
Funding Information
- Natural Science Foundation of Jiangsu Province (BK20251916)
- National Natural Science Foundation of China (52074108)
- National Natural Science Foundation of China (52274189)
- National Natural Science Foundation of China (52474206)
This publication has 45 references indexed in Scilit:
- Effects of heating–cooling on the mechanical properties and damage evolution of granite for underground cryogenic storageActa Geotechnica, 2026
- Current status and development trends of deep rock mechanical properties: experiments and simulationsArchives of Computational Methods in Engineering, 2026
- Multiscale Pore–Fracture Structure Characteristics of Deep Coal Reservoirs in the Eastern Margin of the Ordos Basin, ChinaNatural Resources Research, 2025
- The Influences of Mineral Components and Pore Structure on Hydraulic Fracture Propagation in ShaleRock Mechanics and Rock Engineering, 2024
- Dynamic Mechanical Properties of Deep Coal Rocks Under Three-Dimensional Dynamic and Static LoadingPure and Applied Geophysics, 2024
- Study on the influence of pre-injection blocking fluid on the pore and fracture structure of coal and its seepage lawAdvanced Powder Technology, 2024
- Dynamic Permeability Response and Pore-Fracture Structure Evolution of Deep Coal Reservoirs Under Stress ReleaseNatural Resources Research, 2024
- Combustion mechanism and control approaches of underground coal fires: a reviewInternational Journal of Coal Science & Technology, 2023
- Mechanical behavior of coal under true triaxial loading test connecting the effect of excavation- and mining-induced disturbancesGeomechanics and Geophysics for Geo-Energy and Geo-Resources, 2023
- Rock Mechanics for underground mining2004