A simple image‐based strain measurement method for measuring the strain fields in an RC‐wall experiment
Authors:
- 22 March 2011
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 41 (1) , 1-17
Abstract
A simple image‐based method for measuring plane strain fields on the surface of specimens in earthquake engineering experiments was developed. This method integrated camera calibration, stereo triangulation, image metric rectification and image template matching techniques to develop a method that was cost‐effective, easy to apply and provided a satisfactory level of measurement accuracy. A zero‐strain test conducted using this method showed that the measurement accuracy achieved was 0.04 pixels. That is, the relative displacement accuracy achieved was 0.005 mm and the strain accuracy was 0.001. This level of accuracy was achieved using eight‐mega‐pixel digital cameras to measure a 17 cm × 28 cm measurement region. Cracks that were 0.012 mm wide were identified in the concrete by examining the displacement fields calculated through the application of this image‐based method in an RC‐wall experiment. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 10 references indexed in Scilit:
- Application of digital image correlation for anisotropic plastic deformation during tension testingOptics and Lasers in Engineering, 2010
- Two-dimensional digital image correlation for in-plane displacement and strain measurement: a reviewMeasurement Science and Technology, 2009
- Fast crack detection method for large-size concrete surface images using percolation-based image processingMachine Vision and Applications, 2009
- Collapse of a nonductile concrete frame: Shaking table testsEarthquake Engineering & Structural Dynamics, 2008
- An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systemsEarthquake Engineering and Engineering Vibration, 2006
- Sub-pixel image correlation: an alternative to SAM and dye penetrant for crack detection and mechanical stress localisation in semiconductor packagesMicroelectronics Reliability, 2004
- Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)Earthquake Engineering & Structural Dynamics, 2003
- Voronoï imaging methods for the measurement of granular flowsExperiments in Fluids, 2002
- The effect of strain gage size on measurement errors in textile composite materialsComposites Science and Technology, 1998
- A Combined Corner and Edge Detector1988