Practical challenges of achieving high efficiency boron back surface field solar cells
Authors:
- 1 June 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01608371,p. 000906-000912
Abstract
This work examines two challenges facing the commercialization of boron diffused crystalline silicon solar cells - unintentional iron contamination and the passivation of a textured boron diffused surface. We find that when Fe is introduced into silicon wafers by boron diffusion, the Fe often remains trapped in the boron surface layer and undetectable using bulk lifetime measurements. However this trapped Fe is still a threat to bulk lifetime since subsequent thermal processes can inject this Fe into the bulk. Importantly, POCl3 appears to be ineffective at gettering the trapped Fe; POCl3 gettering works only when the trapped Fe is injected into the bulk prior to POCl3 deposition. An alternate strategy is to directly getter the trapped Fe by using a negatively charged dielectric that is placed on the boron diffused surface. Random pyramid texturing was found to be detrimental to the spin-on SiO2 induced passivation of a boron doped surface. This passivation loss can be minimized by removing the texture with a KOH etch and ~650 mV VOC could be achieved on both FZ and Cz material.Keywords
This publication has 8 references indexed in Scilit:
- Physical and electrical properties of noncrystalline Al2O3 prepared by remote plasma enhanced chemical vapor depositionJournal of Vacuum Science & Technology A, 2001
- Iron contamination in silicon technologyApplied Physics A, 2000
- 24·5% Efficiency silicon PERT cells on MCZ substrates and 24·7% efficiency PERL cells on FZ substratesProgress in Photovoltaics: Research and Applications, 1999
- Iron and its complexes in siliconApplied Physics A, 1999
- Effect of boron gettering on minority-carrier quality for FZ and CZ Si substratesSolar Energy Materials and Solar Cells, 1997
- Thin-Film Long-Wire Antenna for 10.6 µm CO2 Laser RadiationJapanese Journal of Applied Physics, 1992
- Studies of diffused boron emitters: saturation current, bandgap narrowing, and surface recombination velocityIEEE Transactions on Electron Devices, 1991
- Numerical modeling of textured silicon solar cells using PC-1DIEEE Transactions on Electron Devices, 1990