Surface characteristics of aesthetic restorative materials – an SEM study
- 18 April 2006
- journal article
- Published by Wiley in Journal of Oral Rehabilitation
- Vol. 34 (1) , 68-76
Abstract
summary To determine the degree of surface roughness of glass–ionomer cements (GICs) and polyacid‐modified resin composite (PAMRC) after polishing and immersion in various foodstuffs. Three tooth‐coloured restorative materials were used: a PAMRC (F2000), a conventional glass–ionomer cement (CGIC) (Fuji IX) and a resin‐modified glass–ionomer cements (RM‐GIC) (Fuji II LC). Disk‐shaped specimens were prepared and tested with either a plastics matrix finish or after polishing with wet silicon carbide papers up to 2000‐grit. All specimens were immersed in 37 °C‐distilled water for 1 week, followed by three different foodstuffs (red wine, coffee or tea) for a further 2 weeks. Replicas of specimens were prepared by taking polyvinyl siloxane impressions, casting in epoxy resin, gold sputter‐coating and examining using a Field‐Emission Scanning Electron Microscope. The polished and matrix finish specimens of F2000 showed many microcracks at low magnification, and eroded surfaces with missing and protruding particles at high magnification in the polished specimens. The surface‐polished specimens of Fuji II LC were considerably rougher than the matrix‐finish specimens, with large voids and protruding filler particles. The effects of foodstuffs on Fuji II LC and F2000 were not noticeable. The CGIC became noticeably rougher after exposure to coffee and tea. All specimens had the smoothest surface when they were cured against a plastics matrix strip, and all materials had a rougher surface after polishing. None of the foodstuffs produced a perceptible increase in roughness on RM‐GIC and PAMRC surfaces, whereas coffee and tea markedly increased the surface roughness of Fuji IX.Keywords
This publication has 32 references indexed in Scilit:
- Effects of various storage media on surface hardness and structure of four polyacid-modified composite resins ("compomers")Clinical Oral Investigations, 2001
- Evaluation of Subsurface Defects Created During the Finishing of CompositesJournal of Dental Research, 1992
- Properties of a glass-ionomer/resin-composite hybrid materialDental Materials, 1989
- Composite degradation in vivoDental Materials, 1986
- Effects of various finishing methods on staining and accumulation of Streptococcus mutans HS-6 on composite resinsDental Materials, 1985
- Influence of oral fluid on composite resin and glass-ionomer cementThe Journal of Prosthetic Dentistry, 1984
- Gingival Response to Class V Composite Resin RestorationsThe Journal of the American Dental Association, 1983
- Influence of Chemicals on Wear of Dental CompositesJournal of Dental Research, 1982
- Surface Roughness of Microfilled CompositesThe Journal of the American Dental Association, 1981
- A new translucent cement for dentistry. The glass ionomer cementBritish Dental Journal, 1972