Effects of Si and Fe additions on mechanical properties of as-cast Al–5Cu alloys
Authors:
- 1 April 2022
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 38 (6) , 352-362
Abstract
The effects of different Fe and Si additions on the microstructure and mechanical properties of as-cast Al–5Cu alloys were studied. The results show that the evolution order of the Fe-rich intermetallic morphology is needle-like β-Fe then Chinese-script Fe-rich intermetallic, and the area size of Chinese-script Fe-rich intermetallic increased from 66 to 1058 μm2 with the increase of Fe addition. It was found that the combined additions of Fe and Si can change the morphology and size of Fe-rich intermetallic, and thus improving mechanical properties. However, the excessive Si addition would cause Si particles to precipitate, and the morphology of Fe-rich intermetallic had a tendency to needled-like. The alloy's solidification path of second phases is α-Fe + Al mFe→ β-Fe→binary eutectic (Al2Cu + Si) in Al–5Cu– XSi– XFe alloys.Keywords
Funding Information
- National Natural Science Foundation of China
- NSFC (51764040)
This publication has 17 references indexed in Scilit:
- Formation of Fe-rich intermetallic compounds and their effect on the tensile properties of squeeze-cast Al–Cu alloysJournal of Materials Research, 2015
- Tensile Properties of Al-Cu 206 Cast Alloys with Various Iron ContentsMetallurgical and Materials Transactions A, 2014
- Formation and Phase Selection of Iron-Rich Intermetallics in Al-4.6Cu-0.5Fe Cast AlloysMetallurgical and Materials Transactions A, 2012
- Precipitation of iron-rich intermetallic phases in Al-4.6Cu-0.5Fe-0.5Mn cast alloyJournal of Materials Science, 2012
- A New Iron-Rich Intermetallic-Al m Fe Phase in Al-4.6Cu-0.5Fe Cast AlloyMetallurgical and Materials Transactions A, 2012
- The Effect of Iron Content on the Iron-Containing Intermetallic Phases in a Cast 6060 Aluminum AlloyMetallurgical and Materials Transactions A, 2011
- Solidification of Iron-Rich Intermetallic Phases in Al-4.5Cu-0.3Fe Cast AlloyMetallurgical and Materials Transactions A, 2010
- Characterization of an Al–Cu cast alloyMaterials Characterization, 2008
- Enhanced ductility in Al-Si-Cu-Mg foundry alloys with high Si contentMetallurgical and Materials Transactions B, 2006
- As-cast morphology of iron-intermetallics in Al–Si foundry alloysScripta Materialia, 2005