Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines
Authors:
- 1 June 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 59 (6) , 2414-2425
Abstract
This paper compares four analytical models for predicting the cogging torque in surface-mounted permanent-magnet machines, viz., lateral force (LF), complex permeance (CP), and exact subdomain (SD) models, together with an SD model based on a single slot/pole. The models are evaluated for the air-gap flux density, cogging torque, back electromotive force (EMF), electromagnetic torque, saturation effect, and computational complexity, with particular focus on the influence of design parameters, such as the slot-depth-to-slot-opening ratio and the optimal pole-arc-to-pole-pitch and slot-opening-to-slot-pitch ratios, on the cogging torque. It shows that all studied analytical models have similar high accuracy for the fundamental back EMF and average torque. However, their predictions are quite different for the ripples in the back EMF, cogging torque, and electromagnetic torque waveforms. Overall, the SD models have high accuracy, while the exact SD model is the most accurate among the studied models by accounting for mutual influence between slots, albeit with high computational complexity. The computation of the SD models is slower than that of the LF model but can be quicker than that of the CP model. The comparison is validated by the finite-element and experimental results.Keywords
This publication has 45 references indexed in Scilit:
- Internal Permanent Magnet Motor Design for Electric Vehicle DriveIEEE Transactions on Industrial Electronics, 2009
- Analytical Methods for Minimizing Cogging Torque in Permanent-Magnet MachinesIEEE Transactions on Magnetics, 2009
- Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeanceIEEE Transactions on Magnetics, 2006
- Synthesis of cogging-torque waveform from analysis of a single stator slotIEEE Transactions on Industry Applications, 2006
- Analytical Approach to Cogging Torque Calculation of PM Brushless MotorsIEEE Transactions on Industry Applications, 2004
- Design techniques for reducing the cogging torque in surface-mounted PM motorsIEEE Transactions on Industry Applications, 2002
- Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motorsIEEE Transactions on Magnetics, 2001
- Influence of design parameters on cogging torque in permanent magnet machinesIEEE Transactions on Energy Conversion, 2000
- Analytical prediction of the cogging torque in radial-field permanent magnet brushless motorsIEEE Transactions on Magnetics, 1992
- New technique for reducing cogging torque in a class of brushless DC motorsIEE Proceedings B Electric Power Applications, 1992