Multizone Gradient-Modulated Guard Ring Technique for Ultrahigh Voltage 4H-SiC Devices With Increased Tolerances to Implantation Dose and Surface Charges
- 11 April 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 7 (3) , 1505-1512
Abstract
An area efficient multizone gradient-modulated guard ring (MGM-GR) edge termination technique is proposed, fabricated, and analyzed for 10-kV class silicon carbide devices without extra process steps or masks, which provides a better tradeoff between near ideal blocking capabilities and technological process complexity. The edge termination region is divided into multiple zones by employing MGMGR technique, which forms a similar linearly graded doping profile to relieve the amount of electric field crowding at the periphery of the active area and achieve a maximum blocking voltage with wide tolerance to implantation dose. The proposed device shows not less than a 35% reduction in edge termination area in comparison with a conventional equally spaced ring at a breakdown voltage of 10 kV. Moreover, MGM-GR shows good tolerances to breakdown voltage for total implant dose and interface charges. With the application of MGM-GR technique to SiC MOSFET with a 100-μm-thick N- epilayer doped to 5 × 1014 cm -3 , the measured breakdown voltage is 13.6 kV at 10 μA. This voltage is nearly 95% of the theoretical value calculated for a 1-D structure. Simulated and measured characteristics show that MGM-GR structure is a candidate for an ultrahigh voltage power device to maximize power density and driving down system complexity.Keywords
Funding Information
- Science Challenge Project (TZ2018003-1-201)
- National Natural Science Foundation of China (61674026)
This publication has 22 references indexed in Scilit:
- Trench Multiple Floating Limiting Rings Termination for 4H-SiC High-Voltage DevicesIEEE Electron Device Letters, 2016
- Area-Efficient Bevel-Edge Termination Techniques for SiC High-Voltage DevicesIEEE Transactions on Electron Devices, 2016
- 4H-SiC n-Channel Insulated Gate Bipolar Transistors on (0001) and (000-1) Oriented Free-Standing n−SubstratesIEEE Electron Device Letters, 2016
- Solid-State Transformer and MV Grid Tie Applications Enabled by 15 kV SiC IGBTs and 10 kV SiC MOSFETs Based Multilevel ConvertersIEEE Transactions on Industry Applications, 2015
- Ultrahigh-Voltage SiC p-i-n Diodes With Improved Forward CharacteristicsIEEE Transactions on Electron Devices, 2014
- Improvement of high-voltage junction termination extension (JTE) by an optimized profile of lateral doping (VLD)Microelectronics Reliability, 2010
- P-Channel MOSFETs on 4H-SiC {0001} and Nonbasal Faces Fabricated by Oxide Deposition and $\hbox{N}_{2}\hbox{O}$ AnnealingIEEE Transactions on Electron Devices, 2009
- A new analytic method to design multiple floating field limiting rings of power devicesSolid-State Electronics, 2006
- Comparison and optimization of edge termination techniques for SiC power devices2002
- Ionization rates and critical fields in 4H silicon carbideApplied Physics Letters, 1997