FLOW BEHAVIOR OF HEAVY-CRUDE WATER MIXTURES

Authors:

Abstract
Pipeline transport of heavy crude can be a problem. Because the flowing properties of any wet heavy crude are usually unknown, the crude capacity of the transport pipeline cannot be established with the required degree of certainty based on theoretical calculations alone. Therefore a test program was proposed and carried out to characterise the hydraulic behaviour of a particular type of wet crude under laminar flow conditions. The present work reports on an experimental program carried out to assess hydraulic characteristics of heavy crude at various BS&W (Base Sediment and Water) and flow temperatures. Flow visualisation, temperature and pressure drop measurements using K-Type thermocouples and high performance pressure transducers were carried out. The results show no evidence of emulsification at BS&W greater than 30. Flow visualisation revealed the existence of stratified flow type regime for BS&W greater than 30, with oil flowing in the top and the water in the bottom half of the pipe. The inferred apparent viscosity of the oilwater mixtures from the pressure drop measurements indicates a shear thinning behaviour of the latter. The flow is complex and will require careful consideration of start-up conditions, steady flow BS&W and cold temperature behaviour, before any extrapolation is carried out.