Analysis of Accident Progression with the SAMPSON Code in Fukushima Daiichi Nuclear Power Plant Unit 2
- 1 May 2014
- journal article
- research article
- Published by Taylor & Francis in Nuclear Technology
- Vol. 186 (2) , 255-262
Abstract
The Great East Japan Earthquake and tsunami on March 11, 2011, mark the start of the nuclear accident at the Fukushima Daiichi nuclear power plant. Progression of the accident has been analyzed with the SAMPSON code. SAMPSON was originally designed as a large-scale simulation system with the maximum use of mechanistic models and theoretically based equations. In the progression analysis done for Unit 2, SAMPSON could reproduce the pressure transient of the reactor pressure vessel (RPV) reasonably well by assuming partial load operation of the reactor core isolation cooling system (RCIC). The pressure transient of the primary containment vessel was reproduced reasonably well by assuming torus room flooding. After the RCIC trip and manual opening of the steam relief valve, SAMPSON predicted the damage to the upper part of the fuel assemblies near the core center and RPV failure due to creep rupture. More than 91 wt% of the core debris relocated to the lower plenum was as particles, and the major constituents were UO2, Zr, and ZrO2 by SAMPSON analysis.Keywords
This publication has 6 references indexed in Scilit:
- CORIUM BEHAVIOR IN THE LOWER PLENUM OF THE REACTOR VESSEL UNDER IVR-ERVC CONDITION: TECHNICAL ISSUESNuclear Engineering and Technology, 2012
- Model Verification of the Debris Coolability Analysis Module in the Severe Accident Analysis Code ‘SAMPSON’Journal of Nuclear Science and Technology, 2001
- Verification for Flow Analysis Capability in the Model of Three-Dimensional Natural Convection with Simultaneous Spreading, Melting and Solidification for the Debris Coolability Analysis Module in the Severe Accident Analysis Code 'SAMPSON', (I).Journal of Nuclear Science and Technology, 2001
- Development of Molten Core Relocation Analysis Module MCRA in the Severe Accident Analysis Code SAMPSONJournal of Nuclear Science and Technology, 2000
- Development of Severe Accident Analysis Code SAMPSON in IMPACT ProjectJournal of Nuclear Science and Technology, 1999
- Development of Debris Coolability Analysis Module in Severe Accident Analysis Code SAMPSON for IMPACT ProjectJournal of Nuclear Science and Technology, 1999