Effect of extrusion and compression moulding on the thermal properties of nylon-6/silica aerogel composites
Open Access
- 3 October 2017
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 31 (7) , 992-1009
Abstract
The article presents the effect of a lower extrusion speed and compression moulding processes on the thermal properties of polyamide 6 (PA-6)/aerogel composite. Scanning electron and optical microscope images showed that although most of the aerogel was destroyed during extrusion at 65 r/min, extrusion at 5 r/min showed a better retention of the aerogel structure. However, when subjected to moulding in a compression press, both composites extruded at different speeds suffered significant damage. Nevertheless, the extruded samples did show a lower thermal conductivity compared to the virgin polymer. Further, it was observed that the sample extruded at 5 r/min had a lower damage coefficient value with an overall loss of around 33% to the aerogel structure when compared to the material extruded at 65 r/min, which endured a structural loss of 41% to the aerogel in it.Keywords
This publication has 14 references indexed in Scilit:
- Silica aerogel/polyimide composites with preserved aerogel pores using multi-step curingMacromolecular Research, 2013
- Hydrophobic and thermal insulation properties of silica aerogel/epoxy compositeJournal of Non-Crystalline Solids, 2009
- Transparent, Hydrophobic Composite Aerogels with High Mechanical Strength and Low High-Temperature Thermal ConductivitiesThe Journal of Physical Chemistry B, 2008
- Processing and compressive properties of aerogel/epoxy compositesJournal of Materials Processing Technology, 2008
- Cross-linking Amine-Modified Silica Aerogels with Epoxies: Mechanically Strong Lightweight Porous MaterialsChemistry of Materials, 2005
- Effect of mixing on thermal and mechanical properties of aerogel-PVB compositesJournal of Materials Science, 2003
- Aerogel applicationsJournal of Non-Crystalline Solids, 1998
- Applications for silica aerogel productsJournal of Non-Crystalline Solids, 1998
- Measurement of Specific Heat Functions by Differential Scanning Calorimetry.Analytical Chemistry, 1966
- Coherent Expanded Aerogels and JelliesNature, 1931