An innovative methodology to improve the design and the performance of direct injection diesel engines
- 1 October 2004
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 5 (5) , 425-441
Abstract
The present investigation aims at defining a new methodology to analyse the effect of combustion chamber shape and injection strategy on diesel engine emissions and to find an optimized configuration to reduce NOx, soot and HC without significantly decreasing engine performance. This was achieved by using a multistep optimization process based on genetic algorithms. The first step was related to the optimization of combustion chamber shape for a fixed injection strategy. The optimization was firstly performed with respect to a single-pulse injection strategy and a six-hole injector design. Then the process was repeated for an innovative injection strategy characterized by the injection of a relevant quantity of fuel far from top dead centre (large early injection) and a seven-hole injector. The combustion chamber shape was defined according to five geometric parameters, whose ranges of variation were very wide. For all the investigated configurations, the bowl volume and squish-bowl volume ratio were kept constant so that the compression ratio was the same for all the investigated chambers. The spray injection angle was also considered as a variable parameter. The optimization was simultaneously performed for different engine operating conditions, i.e. load and speed values, weighted according to their occurrence in the European Driving Test. From the results of this step, an optimized chamber configuration was selected and, at the same time, the effect of each geometric characteristic on NOx and soot emissions was underlined. In the second step, the combustion chamber shape was kept constant and the optimization process was aimed at identifying an optimized injection strategy for a fixed engine operating mode. Injection pressure, pilot and main advances and pilot energizing time were considered as input for the second step of the optimization process. The numerical tools used in the investigation include a modified version of the KIVA-3V code and a multiobjective genetic algorithm. The code capability to simulate engine performance was assessed by comparing numerical results with experimental data available for the baseline engine configuration. Three fitness functions were defined according to engine emission levels (soot, NOx and HC) and a penalty function was used to account for engine performance and fuel consumption.Keywords
This publication has 16 references indexed in Scilit:
- THEORETICAL INVESTIGATION ON VARIABLE-DENSITY SPRAYSAtomization and Sprays, 2002
- Optimization of High Pressure Common Rail Electro-injector Using Genetic AlgorithmsSAE International Journal of Advances and Current Practices in Mobility, 2001
- Diesel Engine Combustion Chamber Geometry Optimization Using Genetic Algorithms and Multi-Dimensional Spray and Combustion ModelingSAE International Journal of Advances and Current Practices in Mobility, 2001
- Simultaneous Reduction of Engine Emissions and Fuel Consumption Using Genetic Algorithms and Multi-Dimensional Spray and Combustion ModelingSAE International Journal of Advances and Current Practices in Mobility, 2000
- Numerical Study of the Combustion Chamber Shape for Common Rail H.S.D.I. Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 2000
- MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODELAtomization and Sprays, 1999
- Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε ModelsCombustion Science and Technology, 1995
- Comparisons of computed and measured premixed charge engine combustionCombustion and Flame, 1985
- The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical modelCombustion and Flame, 1977
- OXIDATION OF CARBON BETWEEN 1000–2000°C1962