Branched Bio‐Lubricant Base Oil Production through Aldol Condensation
- 6 September 2019
- journal article
- research article
- Published by Wiley in ChemSusChem
- Vol. 12 (21) , 4780-4785
Abstract
Currently, lubricant base oils are derived from petroleum, a nonrenewable feedstock that contributes to greenhouse gas emissions. Bioderived, renewable lubricant base oils can mitigate environmental challenges and offer superior cold flow properties by incorporating branches to the base oil's hydrocarbon backbone with an appropriate synthetic strategy. A strategy was developed to synthesize branched alkanes for lubricant base oil in two steps from 12‐tricosanone, obtained from bioderived fatty acids, and furfural, obtained from lignocellulosic biomass. The reaction pathway involves carbon–carbon coupling through aldol condensation followed by hydrodeoxygenation (HDO). Various solvents (non‐polar, aprotic and polar, protic) and reaction conditions were screened to achieve a maximum yield of 94.3 % of aldol condensation products, containing the majority of a C33 furan (79.5 %) followed by a C28 furan (14.8 %). Subsequent HDO of aldol condensation products over an Ir‐ReOx/SiO2 catalyst produced lubricant‐ranged branched alkanes (C28 and C33) with 61.4 % yield and small fractions (15 and C10. The viscous properties of the produced bio‐lubricant base oil were comparable to commercial petroleum‐derived Group III and Group IV base oils. This approach serves as a potential stepping‐stone to replace petroleumderived base oils and, in turn, reduce greenhouse gas emissions associated with current lubricant production.Keywords
Funding Information
- U.S. Department of Energy (DE-SC0001004)
This publication has 18 references indexed in Scilit:
- Novel pathways for fuels and lubricants from biomass optimized using life-cycle greenhouse gas assessmentProceedings of the National Academy of Sciences, 2015
- Highly Selective Condensation of Biomass‐Derived Methyl Ketones as a Source of Aviation FuelChemSusChem, 2015
- Conversion of levulinic acid derived valeric acid into a liquid transportation fuel of the kerosene typeJournal of Molecular Catalysis A: Chemical, 2014
- Integration of chemical catalysis with extractive fermentation to produce fuelsNature, 2012
- Production of high quality diesel from cellulose and hemicellulose by the Sylvan process: catalysts and process variablesEnergy & Environmental Science, 2012
- Poly‐α‐olefin‐based synthetic lubricants: a short review on various synthetic routesLubrication Science, 2011
- Catalytic routes for the conversion of biomass into liquid hydrocarbon transportation fuelsEnergy & Environmental Science, 2010
- Coupling Fatty Acids by Ketonic Decarboxylation Using Solid Catalysts for the Direct Production of Diesel, Lubricants, and ChemicalsChemSusChem, 2008
- Chemoselective, solvent-free aldol condensation reactionGreen Chemistry, 2000
- Oligomerization of fatty acids as a possible source for high molecular weight hydrocarbons and sulphur-containing compounds in sedimentsOrganic Geochemistry, 1992