Predicting the physical properties of three-component lignocellulose derived advanced biofuel blends using a design of experiments approach
Open Access
- 9 October 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 7 (21) , 5283-5300
Abstract
Acid-catalysed alcoholysis of lignocellulosic biomass produces a tailorable advanced biofuel blend, with the primary products being an alkyl levulinate, a dialkyl ether, and alcohol. Varying process parameters during production has the potential to produce differing quantities of the three components, affecting both physical and combustion properties. Starting alcohols, ethanol, n-butanol, and n-pentanol were chosen to investigate the effects of carbon chain length on the physical properties of model ethyl, butyl, and pentyl-based blends, produced from alcoholysis. Blends were designed to contain ≥50 vol% alkyl levulinate, with the remainder composed of the corresponding ether and alcohol. Existing fuel standards set limits for different physical and chemical properties that should be met to enhance commercial viability. In the present work, the flash point, density at 15 °C and kinematic viscosity at 40 °C (KV40) were measured for a range of three-component blends. The study also investigated the impact of diesel (EN 590 compliant) blending on these properties, at 0–95% volume diesel. A design of experiments approach selected optimal blends for testing and was used to develop predictive physical properties models based on polynomial fits. The predictive models for the properties of the three-component blends had average absolute relative deviations −3, 0.874–0.957 g cm−3, and 0.878–0.949 g cm−3 for the ethyl, butyl and pentyl-based blends without diesel, respectively. The KV40 ranged from 1.186–1.846 mm2 s−1 and 1.578–2.180 mm2 s−1 for butyl and pentyl-based blends without diesel, respectively. Butyl-based blends with diesel were found to be the most practically suitable and met the BS 2869 density limits.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/L014912/1)
This publication has 52 references indexed in Scilit:
- Predicting the temperature dependent density of biodiesel–diesel–bioethanol blendsFuel, 2013
- Conversion of proteins into biofuels by engineering nitrogen fluxNature Biotechnology, 2011
- Physical and chemical properties of ethanol–diesel fuel blendsFuel, 2011
- Pentanol isomer synthesis in engineered microorganismsApplied Microbiology and Biotechnology, 2009
- Experimental determination and estimation of closed cup flash points of mixtures of flammable solventsProcess Safety Progress, 2005
- A model for predicting the flash point of ternary flammable solutions of liquidCombustion and Flame, 2004
- A neural network approach to the prediction of diesel fuel lubricityFuel, 2002
- From UNIFAC to Modified UNIFAC (Dortmund)Industrial & Engineering Chemistry Research, 2001
- A Comparison of Algorithms for Constructing Exact D-Optimal DesignsTechnometrics, 1980
- LEVULINIC ACID. II. THE VAPOR PRESSURES OF ITS ALKYL ESTERS (C1--C6Journal of the American Chemical Society, 1931