Three-Dimensional Structure Analysis and Percolation Properties of a Barrier Marine Coating
Open Access
- 31 January 2013
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 3 (1) , srep01177
Abstract
Artificially structured coatings are widely employed to minimize materials deterioration and corrosion, the annual direct cost of which is over 3% of the gross domestic product (GDP) for industrial countries. Manufacturing higher performance anticorrosive coatings is one of the most efficient approaches to reduce this loss. However, three-dimensional (3D) structure of coatings, which determines their performance, has not been investigated in detail. Here we present a quantitative nano-scale analysis of the 3D spatial structure of an anticorrosive aluminium epoxy barrier marine coating obtained by serial block-face scanning electron microscopy (SBFSEM) and ptychographic X-ray computed tomography (PXCT). We then use finite element simulations to demonstrate how percolation through this actual 3D structure impedes ion diffusion in the composite materials. We found the aluminium flakes align within 15° of the coating surface in the material, causing the perpendicular diffusion resistance of the coating to be substantially higher than the pure epoxy.Keywords
This publication has 29 references indexed in Scilit:
- Non-destructive analysis of tablet coatings with optical coherence tomographyEuropean Journal of Pharmaceutical Sciences, 2011
- 3D characterization of open porous vacuum plasma sprayed titanium coatings by means of high resolution micro computer tomographyMaterials Letters, 2009
- Epoxy ester resins as corrosion inhibitors for aluminium and zinc pigmentsCorrosion Science, 2006
- Flake alignment in composite coatingsJournal of Membrane Science, 2004
- Barrier films using flakes and reactive additivesProgress in Organic Coatings, 2003
- Paint and surface coatings1999
- The barrier properties of paint coatingsProgress in Organic Coatings, 1991
- Influence of barrier pigments on the performance of protective organic coatingsProgress in Organic Coatings, 1988
- A critical review of the protection of metals by paintsCorrosion Science, 1986
- The mechanism for the cathodic delamination of organic coatings from a metal surfaceProgress in Organic Coatings, 1983