High-entropy perovskites La M 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 O 3−δ ( M = Cr, Ti) for ethanol steam reforming
Authors:
- Semon Amgad HannaSHSemon Amgad Hanna
- Nikita EremeevNENikita Eremeev
- Aleksandra LeonovaALAleksandra Leonova
- Olga BulavchenkoOBOlga Bulavchenko
- Tatiana GlaznevaTGTatiana Glazneva
- Artem UrlukovAUArtem Urlukov
- Arcady IshchenkoAIArcady Ishchenko
- Igor ZilberbergIZIgor Zilberberg
- Vladislav SadykovVladislav Sadykov
- Yulia BespalkoYBYulia Bespalko
Open Access
- 25 June 2026
- journal article
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 13 (4) , 10087
Abstract
Ethanol steam reforming is a promising route for hydrogen production from renewable sources, but catalyst deactivation caused by metal sintering and carbon deposition remains a major limitation. Hence, the search for novel stable catalysts is imperative. A promising approach is using the catalysts based on high-entropy perovskites, which possess high oxygen mobility and surface reactivity, as well as enhanced stability, which may contribute to the suppression of catalyst sintering and coke formation. In this study, the catalysts for ethanol steam reforming based on high-entropy perovskites La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3−δ (LCMFCN) and La(Ti0.2Mn0.2Fe0.2Co0.2Ni0.2)O3−δ (LTMFCN) were studied in comparison to the catalyst based on low-entropy perovskite LaMnO3−δ. The Ni-supported high-entropy perovskite catalysts showed improved ethanol steam reforming behavior compared with Ni/LaMnO3−δ, giving nearly complete ethanol conversion and H2/CO ratios above 3 at 700 °C. Among the studied catalysts, Ni/LCMFCN showed the strongest individual performance, reaching 99.84 % ethanol conversion, 54.99 % H2 yield, and H2/CO ratio of 3.38 at 700 °C. The 20 h stability test further showed that Ni/LCMFCN maintained nearly complete ethanol conversion with stable product selectivity. Post-reaction TEM analysis did not reveal massive carbon deposits blocking the catalyst surface. In the high-entropy perovskite-based catalysts, carbon was mainly observed in the form of filamentous carbon structures; no extensive surface-blocking coke layer was detected.Keywords
This publication has 116 references indexed in Scilit:
- Density Functional Theory (DFT) Study of LaMn 0.4 Fe 0.6 O 3 Perovskite OxideChemistrySelect, 2025
- Tri‐Transition Metal‐Substituted Lanthanum‐Based Perovskite Formulation for Catalytic Application in APApplied Organometallic Chemistry, 2025
- High‐Entropy Perovskite Oxides for Thermochemical Solar Fuel ProductionEnergy Technology, 2024
- High Configuration Entropy Activated Lattice Oxygen for O2 Formation on Perovskite ElectrocatalystAdvanced Functional Materials, 2022
- Advanced High Entropy Perovskite Oxide Electrocatalyst for Oxygen Evolution ReactionAdvanced Functional Materials, 2021
- High‐Entropy Oxides: Fundamental Aspects and Electrochemical PropertiesAdvanced Materials, 2019
- ChemInform Abstract: Perovskites and Their Nanocomposites with Fluorite-Like Oxides as Materials for Solid Oxide Fuel Cells Cathodes and Oxygen-Conducting Membranes: Mobility and Reactivity of the Surface/Bulk Oxygen as a Key Factor of Their PerformanceChemInform, 2011
- Application of supported perovskite-type catalysts for vehicular emission controlCatalysis Surveys from Asia, 2006
- Temperature Sensitive Properties of the La(TixMn1 − x)O3 SystemJournal of Electroceramics, 2005
- Reactivity of La1 − x Sr x FeO3 − y (x = 0–1) Perovskites in Oxidation ReactionsKinetics and Catalysis, 2005