Delocalized Lithium Ion Flux by Solid-State Electrolyte Composites Coupled with 3D Porous Nanostructures for Highly Stable Lithium Metal Batteries
Open Access
- 29 July 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (16) , 16020-16035
Abstract
This work investigates the root cause of failure with the ultimate anode, Li metal, when employing conventional/composite separators and/or porous anodes. Then a feasible route of utilizing Li metal is presented. Our operando and microscopy studies have unveiled that Li+ flux passing through the conventional separator is not uniform, resulting in preferential Li plating/stripping. Porous anodes alone are subject to clogging with moderate- or high-loading cathodes. Here we discovered it is necessary to seek synergy from our separator and anode pair to deliver delocalized Li+ to the anode and then uniformly plate Li metal over the large surface areas of the porous anode. Our polymer composite separator containing a solid-state electrolyte (SE) can provide numerous Li+ passages through the percolated SE and pore networks. Our finite element analysis and comparative tests disclosed the synergy between the homogeneous Li+ flux and current density reduction on the anode. Our composite separators have induced compact and uniform Li plating with robust inorganic-rich solid electrolyte interphase layers. The porous anode decreased the nucleation overpotential and interfacial contact impedance during Li plating. Full cell tests with LiFePO4 and Li[Ni0.8Mn0.1Co0.1]O2 (NMC811) exhibited remarkable cycling behaviors: ∼80% capacity retention at the 750th and 235th cycle, respectively. A high-loading NMC811 (4 mAh cm-2) full cell displayed maximum cell-level energy densities of 334 Wh kg-1 and 783 Wh L-1. This work proposes a solution for raising energy density by adopting Li metal, which could be a viable option considering only incremental advancement in conventional cathodes lately.Keywords
This publication has 96 references indexed in Scilit:
- Preparation and electrochemical characterization of gel polymer electrolyte based on electrospun polyacrylonitrile nonwoven membranes for lithium batteriesJournal of Power Sources, 2011
- Highly conductive and electrochemically stable plasticized blend polymer electrolytes based on PVdF-HFP and triblock copolymer PPG-PEG-PPG diamine for Li-ion batteriesJournal of Power Sources, 2011
- A review of the features and analyses of the solid electrolyte interphase in Li-ion batteriesElectrochimica Acta, 2010
- Electrochemical performance of electrospun poly(vinylidene fluoride-co-hexafluoropropylene)-based nanocomposite polymer electrolytes incorporating ceramic fillers and room temperature ionic liquidElectrochimica Acta, 2010
- Lithium metal stripping/plating mechanisms studies: A metallurgical approachElectrochemistry Communications, 2006
- Surface films phenomena on vanadium-pentoxide cathodes for Li and Li-ion batteries: in situ AFM imagingElectrochemistry Communications, 2004
- Microporous PVdF-HFP based gel polymer electrolytes reinforced by PEGDMA networkElectrochemistry Communications, 2004
- Complexation of poly(vinylidene fluoride):LiPF6 solid polymer electrolyte with enhanced ion conduction in ‘wet’ formJournal of Power Sources, 2003
- Curvature-Directed Crystallization of Poly(vinylidene difluoride) in Nanotube WallsMacromolecules, 2003
- Dendritic growth mechanisms in lithium/polymer cellsJournal of Power Sources, 1999