Vibration welding of glass-filled poly(styrene-co-maleic anhydride)
Author:
- 1 January 2001
- journal article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 15 (10) , 1213-1219
Abstract
Vibration welding is used to assess the weldability of 16 wt% glass-filled poly(styrene-comaleic anhydride) (16-GF-SMA). Data are presented on the strengths of butt welds for two specimen thicknesses and T-welds for one specimen thickness. The maximum weld strength of butt joints is shown to be only 35% of the tensile strength of the material. T-joints are shown to have only 61% of the strength of butt joints. The relative butt-weld strengths of 16-GF-SMA are much lower than those measured in other glass filled resins: 71% in a 20-wt% glass-filled modified poly(phenylene oxide); 68 and 60%, respectively, in 15- and 30-wt% glass-filled grades of poly(butylene terephthalate); and 58% in a 40-wt% glass-filled polyamide 6,6.Keywords
This publication has 7 references indexed in Scilit:
- The vibration welding of poly(methyl methacrylate) to itself and to polycarbonate, poly(butylene terephthalate), and modified poly(phenylene oxide)Journal of Adhesion Science and Technology, 2001
- Assessment of geometries for determining strengths of thermoplastic vibration weldsJournal of Materials Science, 2000
- Friction welding of polyamidesPolymer Engineering & Science, 1997
- The effect of fillers on the vibration welding of poly(butylene terephthalate)Polymer, 1993
- The Vibration Welding of Polyamide 66Journal of Thermoplastic Composite Materials, 1993
- Strength of glass‐filled modified polyphenylene oxide vibration‐welded butt jointsPolymer Engineering & Science, 1991
- Joining methods for plastics and plastic composites: An overviewPolymer Engineering & Science, 1989