Influence of Right Triangular Prism Rough Beds on Hydraulic Jumps
Open Access
- 10 January 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (2) , 594
Abstract
A hydraulic jump phenomenon is exciting in turbulent flow as it causes large-scale turbulence and high-energy loss. This paper investigates the hydraulic jump characteristics of right triangular prism rough beds. The renormalization group RNG k-ε turbulent model and the volume of fluid (VOF) method in a CFD model are utilized to simulate hydraulic jumps. A total of 210 numerical simulations of four new types of rough beds were performed with an initial Froude number (Fr1) ranging from 4.8 to 9.4, the non-dimensionless wave steepness values of 0.67 ≤ t/s ≤ 1.33, and the distances between roughness elements of 0 ≤ Ls/y1 ≤ 2.67. This study found that arranging the right triangular prism rough elements in a stilling basin increased bed shear stress and energy loss. At the same time, they reduced sequent depth and jump length by about 22% and 50% compared to a smooth bed, respectively. In addition, the entropy production rates are also used to analyze energy dissipation, which clearly shows that the characteristic shape of a rough bed significantly influences the hydraulic jump length. Equations and plots that specify the relationships between the hydraulic jumps and study parameters are helpful guidelines for defining the rough bed dimension when designing or repairing a stilling basin for low-head irrigation works and highway sewers.Keywords
This publication has 18 references indexed in Scilit:
- Effect of triangular corrugated beds on the hydraulic jump characteristicsCanadian Journal of Civil Engineering, 2013
- Internal Flow Losses: A Fresh Look at Old ConceptsJournal of Fluids Engineering, 2011
- Effect of sinusoidal corrugated bed on hydraulic jump characteristicsJournal of Hydro-environment Research, 2009
- Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD ApplicationsJournal of Fluids Engineering, 2008
- Corrugated Bed Hydraulic Jump Stilling BasinJournal of Applied Sciences, 2007
- Entropy production calculation for turbulent shear flows and their implementation in cfd codesInternational Journal of Heat and Fluid Flow, 2005
- Hydraulic Jumps on Corrugated BedsJournal of Hydraulic Engineering, 2002
- Physically Based Hydraulic Jump Model for Depth-Averaged ComputationsJournal of Hydraulic Engineering, 1996
- Development of turbulence models for shear flows by a double expansion techniquePhysics of Fluids A: Fluid Dynamics, 1992
- Volume of fluid (VOF) method for the dynamics of free boundariesJournal of Computational Physics, 1981