Effect of nano-fuel additive on performance and emission characteristics of the diesel engine using biodiesel blends with diesel fuel
Authors:
- 26 April 2018
- journal article
- research article
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 41 (3) , 316-321
Abstract
Biodiesel as an alternative source of petroleum fuel could reduce the dependence on petroleum products and control pollution problems. These biofuels are derived from various sources and if directly used in the engine it will not completely burn and will cause an increase in the emission level. In this experiment, 20% of rubber seed oil (B20) blended with pure diesel fuel along with aluminium oxide (Al2O3) was used in the proportions of 10 , 20 and 30 ppm. The obtained experimental results showed that the brake thermal efficiency was increased and the engine emission was reduced. And the brake-specific fuel consumption was reduced, but the NOx level increased at the proportion level at 10 ppm of nano additives. This experiment has been carried out in a single cylinder water-cooled engine connected to an electrical dynamometer without engine modification and the injection pressure and timings were maintained at the standard level designed for the engine. The dynamic energy of aluminium oxide blend with the biodiesel improved the combustion characteristics in the engine, and caused a reduction in carbon deposits by 44.8% in the cylinder wall.Keywords
This publication has 8 references indexed in Scilit:
- The influence of injection parameters on the performance and emission characteristics of a DI diesel engine using biofuel-blended-pure diesel fuelInternational Journal of Ambient Energy, 2019
- Comprehensive overview on diesel additives to reduce emissions, enhance fuel properties and improve engine performanceRenewable and Sustainable Energy Reviews, 2017
- Engine bench and road testing of an engine oil containing MoS2 particles as nano-additive for friction reductionTribology International, 2017
- Development of optimum friction new nano hybrid composite liner for biodiesel fuel engineTransportation Research Part D: Transport and Environment, 2016
- Effect on Performance and Emission Analysis of Advanced Ceramic Material Coated Piston Crown Using Plasma Spray Coating TechniquesApplied Mechanics and Materials, 2015
- Performance, emission and combustion characteristics of an indirect injection (IDI) multi-cylinder compression ignition (CI) engine operating on neat jatropha and karanj oils preheated by jacket waterBiomass and Bioenergy, 2012
- Influence of ethanol blends on the combustion performance and exhaust emission characteristics of a four-cylinder diesel engine at various engine loads and injection timingsFuel, 2011
- Studies on improving the performance of rubber seed oil fuel for diesel engine with DEE port injectionFuel, 2010