Enhancement of Interface between Lignocellulosic Fibers and Polypropylene Matrix via the Structure Alteration of Lignin at Elevated Temperatures
Open Access
- 28 November 2020
- Vol. 13 (23) , 5428
Abstract
This paper investigated the feasibility of enhancing the interface between lignocellulosic fibers and a polypropylene matrix via structure alteration of lignin at elevated temperatures. Alkali treatment can remove gum substances from lignocellulose fibers effectively at elevated temperatures but easily causes damages to fiber strength. In previous studies on directional delignification of lignocellulosic fibers, loss of fiber strength is avoided but condensation and degradation of lignin are accelerated. So far, few reports have been available on the effect of lignin structures on the interface between fibers and a matrix. In this study, jute fibers with different lignin structures are produced at 100 and 130 °C for reinforcing a polypropylene matrix. The interface between the fibers and matrix is analyzed. The result shows that decrease in aliphatic hydroxyl concentration by 9.5% at 130 °C from 3 to 5 h contributes to a 14.2% decrease in the surface energy of jute fibers. Meanwhile, the polydispersity index of lignin decreases from 1.21 to 1.15. Centralized distribution of lignin molecule-weight and reduction in fiber surface energy improves the interface between the fibers and matrix, which manifests as a 30.8% increase in the impact strength of the composites. Similar improvement is not observed in the composites reinforced with jute fibers at 100 °C, due to the absence of lignin-structure changes. This paper provides a new strategy to improve the interface between lignocellulose fibers and a hydrophobic matrix.Keywords
Funding Information
- China Postdoctoral Science Foundation (2019M652273)
- Jiangxi Excellent Young Talents Program (20192BCB23030)
- Jiangxi Provincial Postdoctoral Research Project Merit Funding (2019KY50)
- Jiangsu Key Research & Development Project (BE2018349)
- Inner Mongolia Science and Technology Major Project (ZDZX2018060)
This publication has 28 references indexed in Scilit:
- Recent advancements of plant-based natural fiber–reinforced composites and their applicationsComposites Part B: Engineering, 2020
- Preparation and characterization of wood-plastic composite by utilizing a hybrid compatibilizer systemIndustrial Crops and Products, 2020
- Properties of Chemically Modified (Selected Silanes) Lignocellulosic Filler and Its Application in Natural Rubber BiocompositesMaterials, 2020
- Influence of eco-friendly pretreatment of lignocellulosic biomass using ionic liquids on the interface adhesion and characteristics of polymer composite boardsJournal of Composite Materials, 2020
- New insights on structure of lignin‐carbohydrate complex from hot water pretreatment liquorCarbohydrate Polymers, 2019
- Mechanical properties of waste paper/jute fabric reinforced polyester resin matrix hybrid compositesCarbohydrate Polymers, 2017
- Developing plant fibre composites for structural applications by optimising composite parameters: a critical reviewJournal of Materials Science, 2013
- Effect of mercerization on mechanical, thermal and degradation characteristics of jute fabric-reinforced polypropylene compositesFibers and Polymers, 2012
- Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix compositesJournal of Materials Science, 2004
- Surface modifications of natural fibers and performance of the resulting biocomposites: An overviewComposite Interfaces, 2001