Experimental Investigation of Heat Dissipation in Lithium‐Ion Battery Packs Through Multi‐Fan Configurations and Passive Rib Turbulators
Authors:
- 3 March 2026
- journal article
- research article
- Published by Wiley in Energy Storage
- Vol. 8 (2) , e70376
Abstract
Air cooling is extensively utilized in lithium‐ion battery powered drivetrains, and this study examines the effects of air velocity and cooling fan arrangement. The pack behavior is tested under 1C, 1.5C, and 2C discharge rates with three different fan arrangements (Single IN, In‐Out, Out‐Out). In the Single IN arrangement, a single fan draws air in, whereas in the In‐Out configuration, one fan pulls air in while another pushes it out, and in the Out‐Out configuration, both fans expel air. Results indicated that increasing the air velocity from 0 to 4 m/s at 25°C significantly enhanced convective heat transfer and reduced local hotspots. At a 1C discharge rate and 4 m/s air velocity, the maximum temperature ( T max ) was lowered by 17.35°C compared to natural convection. The In‐Out fan configuration outperformed the Single IN and Out‐Out configurations, achieving a 2.57°C reduction in T max and a 2.25°C decrease in temperature difference (Δ T max ). The Out‐Out configuration was less efficient due to airflow blockage by holders and connectors. A single rib turbulator positioned at a 45° angle relative to the lateral direction further reduced T max by 6.27°C. The findings highlight the importance of airflow and fan setup in battery thermal performance.Keywords
Funding Information
- University of Petroleum and Energy Studies (UPES/R&D‐SoAE/08042024/6)
This publication has 44 references indexed in Scilit:
- Optimising thermoelectric coolers for battery thermal management in light electric vehiclesApplied Energy, 2025
- Developing a novel battery thermal management system utilizing supercritical CO2 as the cooling mediumApplied Energy, 2024
- Refined air-cooled battery sizing process for conceptual design of eVTOL aircraftApplied Energy, 2024
- To boost waste heat harvesting and power generation through a portable heat pipe battery during high efficient electronics coolingApplied Energy, 2024
- Thermal runaway fault prediction in air-cooled lithium-ion battery modules using machine learning through temperature sensors placement optimizationApplied Energy, 2023
- Cooling Performance Optimization of Air‐Cooled Battery Thermal Management System with L‐Type FlowEnergy Technology, 2023
- Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffleApplied Thermal Engineering, 2018
- Reverse layered air flow for Li-ion battery thermal managementApplied Thermal Engineering, 2018
- Structural optimization of lithium-ion battery pack with forced air cooling systemApplied Thermal Engineering, 2017
- Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangementsApplied Thermal Engineering, 2015