A New Semi-Analytical Method for Elasto-Plastic Analysis of a Deep Circular Tunnel Reinforced by Fully Grouted Passive Bolts
Open Access
- 26 June 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4402
Abstract
The use of fully grouted passive bolts as a reinforcement technique has been widely applied to improve the stability of tunnels. To analyze the behaviors of passive bolts and rock mass in a deep circular tunnel, a new semi-analytical solution is presented in this work based on the finite difference method. The rock mass was assumed to experience elastic–brittle–plastic behavior, and the linear Mohr–Coulomb criterion and the nonlinear generalized Hoek–Brown criterion were employed to govern the yielding of the rock mass. The interaction and decoupling between the rock mass and bolts were considered by using the spring–slider model. To simplify the analysis process, a bolted tunnel was divided into a bolted region and an unbolted region, while the contact stress at the bolted–unbolted interface and the rigid displacement of the bolts were obtained using two boundary conditions in combination with the bisection method. Comparisons show that the results obtained using the proposed solution agree well with those from the commercial numerical software and the in situ test. Finally, parametric analyses were performed to examine the effects of various reinforcement parameters on the tunnel’s stability. The proposed solution provided a fast but accurate estimation of the behavior of a reinforced deep circular tunnel for preliminary design purposes.Keywords
This publication has 30 references indexed in Scilit:
- Coupling Analysis for Rock Mass Supported with CMC or CFC Rockbolts Based on Viscoelastic MethodRock Mechanics and Rock Engineering, 2019
- An improved numerical approach in surrounding rock incorporating rockbolt effectiveness and seepage forceActa Geotechnica, 2018
- Undrained analysis of ground reaction curves for deep tunnels in saturated ground considering the effect of ground reinforcementTunnelling and Underground Space Technology, 2018
- Rheological Model of DMFC Rockbolt and Rockmass in a Circular TunnelRock Mechanics and Rock Engineering, 2014
- Tunnel reinforcement with rockboltsTunnelling and Underground Space Technology, 2011
- Analytical approach for the design of active grouted rockbolts in tunnel stability based on convergence-confinement methodTunnelling and Underground Space Technology, 2009
- Analytical and Numerical Study of the Mechanics of Rockbolt Reinforcement around Tunnels in Rock MassesRock Mechanics and Rock Engineering, 2009
- Elastic Solution for Deep Tunnels. Application to Excavation Damage Zone and Rockbolt SupportRock Mechanics and Rock Engineering, 2007
- A theoretical approach for analysis of the interaction between grouted rockbolts and rock massesTunnelling and Underground Space Technology, 2005
- History of the sprayed concrete lining method—part I: milestones up to the 1960sTunnelling and Underground Space Technology, 2003