Fiber-Element Model for Slender HSS Columns Retrofitted with Bonded High-Modulus Composites
Authors:
- 1 January 2007
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 133 (1) , 85-95
Abstract
This paper presents an analytical model developed to predict the behavior of concentrically loaded cold-formed square hollow structural section (HSS) slender columns, strengthened with high-modulus carbon fiber reinforced polymer (CFRP) sheets. The model predicts the load versus axial and lateral displacements, and accounts for plasticity of steel, the built-in through-thickness residual stresses, geometric nonlinearity, initial out-of-straightness imperfection, and the contribution of CFRP sheets. The model was verified using test results. Since the gains in strength due to CFRP retrofitting of the tested columns were found to be sensitive to the inherent out-of-straightness, the model was used to uncouple the effects of out-of-straightness and CFRP reinforcement ratio. It was shown that axial strength and stiffness of HSS columns could be increased substantially when retrofitted with longitudinal CFRP sheets, due to reduction of the lateral displacement induced by buckling. It was also shown that CFRP e...Keywords
This publication has 8 references indexed in Scilit:
- Axial loading tests on short and long hollow structural steel columns retrofitted using carbon fibre reinforced polymersCanadian Journal of Civil Engineering, 2006
- Strengthening of an artificially degraded steel beam utilising a carbon/glass composite systemConstruction and Building Materials, 2006
- Progress in the technique of upgrading metallic structures with advanced polymer compositesProgress in Structural Engineering and Materials, 2002
- A theoretical investigation of the column behaviour of cold-formed square hollow sectionsThin-Walled Structures, 1993
- Elasto‐Plastic Analysis of Box‐Beam‐Columns Including Local Buckling EffectsJournal of Structural Engineering, 1991
- Residual Stresses in Cold‐Formed Steel MembersJournal of Structural Engineering, 1990
- Column behaviour of cold-formed hollow structural steel shapesCanadian Journal of Civil Engineering, 1983
- Limit states design of HSS columnsCanadian Journal of Civil Engineering, 1979