The Effects of Multi-Stage Homogenizations on the Microstructures and Mechanical Properties of Al–Zn–Mg–Zr–Sc Alloys
Open Access
- 6 January 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 470
Abstract
This study is aimed at exploring the effects of multi-stage homogenization and trace amounts of Zr and Sc on the microstructures, mechanical properties, and recrystallization of Al–4.5Zn–1.5Mg alloys. The mechanical properties of the AA7005 aluminum alloys after the T6 heat treatment were evaluated through a hardness test and tensile test. The microstructures were analyzed by an optical microscope (OM), a differential scanning calorimeter (DSC), a transmission electron microscope (TEM), a scanning electron microscope (SEM), and electron backscattered diffraction (EBSD). The results show that the grain refinement effect of the as-cast, homogenized, and recrystallized Al–4.5Zn–1.5Mg alloy containing 0.05Sc (wt%) after the T6 heat treatment was more significant than that of the alloy containing 0.1Zr (wt%). In addition, compared with the aforementioned one-stage homogenization heat treatment, the two-stage homogenization made the dispersed grain phase (Al3Zr/Al3Sc) smaller. As a result, the T6 mechanical strength of the alloy after the two-stage homogenization heat treatment was better than that of the contrastive alloy after the one-stage homogenization heat treatment. However, the two different homogenization heat treatments caused a greater divergence between the sizes of the dispersed grain phases of the Al–4.5Zn–1.5Mg alloys containing Zr than between the sizes of the dispersed grain phases of the alloys containing Sc. Therefore, after the two-stage homogenization heat treatment, the alloy with 0.1Zr (wt%) promoted the mechanical properties better than the alloy with 0.05Sc (wt%).Keywords
This publication has 18 references indexed in Scilit:
- Grain structure effect on quench sensitivity of Al—Zn—Mg—Cu—Cr alloyTransactions of Nonferrous Metals Society of China, 2016
- Effect of minor Sc and Zr on recrystallization behavior and mechanical properties of novel Al–Zn–Mg–Cu alloysJournal of Alloys and Compounds, 2016
- Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloyMaterials Characterization, 2015
- Effect of one-step and two-step homogenization treatments on distribution of Al3Zr dispersoids in commercial AA7150 aluminium alloyTransactions of Nonferrous Metals Society of China, 2012
- Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloysActa Materialia, 2011
- Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°CActa Materialia, 2008
- Effect of Homogenization and Aging Treatment on Mechanical Properties and Stress-Corrosion Cracking of 7050 AlloysMetallurgical and Materials Transactions A, 2007
- Scientific principles of making an alloying addition of scandium to aluminium alloysMaterials Science and Engineering: A, 2000
- Effects of Mg addition on the kinetics of low-temperature precipitation in Al–Li–Cu–Ag–Zr alloysMaterials Science and Engineering: A, 1998
- Application of modern aluminum alloys to aircraftProgress in Aerospace Sciences, 1996