Synthesis of Fe-rich Fe–Al nanocrystalline solid solutions using ball milling
Authors:
- 1 May 1999
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 14 (5) , 1760-1770
Abstract
The synthesis of nanocrystalline Fe, Fe–4 wt% Al, and Fe–10 wt% Al solid solutions by SPEX ball milling has been studied. The microstructural evolution during ball milling, as well as subsequent heat treatment, has been characterized. The results demonstrate that ball milling promotes the formation of αFe–4 wt% Al and αFe–10 wt% Al solid solutions by reducing the activation energy of these alloys and generating thermal energy during this process. For Fe–10 wt% Al powders milled for various time intervals up to approximately 20 min, the FeAl intermetallic compound is formed. For alloys annealed at temperatures ranging from 600 to 1000 °C, the addition of 10 wt% Al to Fe significantly enhances the thermal stability of the nanocrystalline Fe–Al alloys. Interestingly, the addition of Al within the range of 4–10 wt% seems to have little effect on the thermal stability of these alloys annealed under the same conditions. Also, the thermal stability improves for alloys milled in air as opposed to those processed using Ar.Keywords
This publication has 28 references indexed in Scilit:
- Thermal spraying of nanocrystalline inconel 718Nanostructured Materials, 1997
- Report on the Third International Conference on Nanostructured Materials, Kona, Hawaii; July 7–12, 1996Nanostructured Materials, 1996
- Thermal stability of nanocrystalline Fe-10 wt.% Al produced by cryogenic mechanical alloyingNanostructured Materials, 1996
- Influence of milling conditions on the FeAl intermetallic formation by mechanical alloyingMaterials Science and Engineering: A, 1996
- A study of nanocrystalline iron and aluminium metals and Fe3Al intermetallic by mechanical alloyingJournal of Materials Science, 1995
- Grain growth and chemical ordering in (Fe,Mn)3SiNanostructured Materials, 1995
- Inter-dependence of grain growth, Nb segregation, and chemical ordering in FeSiNb nanocrystalsNanostructured Materials, 1994
- Mechanical alloying in the FeAl systemMaterials Science and Engineering: A, 1994
- The thermal stability of nonocrystalline FeSiNb prepared by mechanical alloyingNanostructured Materials, 1993
- Grain growth in nanocrystalline TiO2 and its relation to vickers hardness and fracture toughnessScripta Metallurgica et Materialia, 1990