Using torsional bar testing to determine fracture toughness
Authors:
- 17 November 2000
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 23 (11) , 917-927
Abstract
A new method to determine fracture toughness KIC of materials is introduced. A round‐rod specimen having a V‐grooved spiral line with a 45° pitch is tested under pure torsion. An equibiaxial tensile/compressive stress state is effectively created to simulate conventional test methods using a compact‐type specimen with a thickness equivalent to the full length of the spiral line. KIC values are estimated from the fracture load and crack length with the aid of a three‐dimensional finite element analysis. KIC of 7475‐T7351 aluminium is estimated to be 51.3 MPa √m, which is higher than the vendor’s value in the TL orientation by ∼0.8% and higher than 0.5T compact tension (CT) value by 6%; A302B steel yields 54.9 MPa √m being higher than CT test value by ∼2%. Good agreement between the KIC values obtained by different methods indicates the proposed method is sound and reliable.Keywords
This publication has 15 references indexed in Scilit:
- A calculation model and boundary element method simulation for 3-D blunt cracksEngineering Fracture Mechanics, 1994
- An Approximate Technique for Predicting Size Effects on Cleavage Fracture Toughness (Jc) Using the Elastic T Stress1994
- J-Dominance of short cracks in tension and bendingJournal of the Mechanics and Physics of Solids, 1991
- Stress‐intensity factor computation in three dimensions with quarter‐point elementsInternational Journal for Numerical Methods in Engineering, 1980
- Transition elements to be used with quarter‐point crack‐tip elementsInternational Journal for Numerical Methods in Engineering, 1978
- Stress singularity for a crack with an arbitrarily curved frontEngineering Fracture Mechanics, 1977
- Triangular quarter‐point elements as elastic and perfectly‐plastic crack tip elementsInternational Journal for Numerical Methods in Engineering, 1977
- An energy release rate criterion for mixed mode fractureInternational Journal of Fracture, 1975
- Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materialsJournal of the Mechanics and Physics of Solids, 1973
- On the Crack Extension in Plates Under Plane Loading and Transverse ShearJournal of Basic Engineering, 1963