Production of Biodiesel from Waste Cooking Oil via Deoxygenation Using Ni-Mo/Ac Catalyst
Open Access
Abstract
Waste cooking oil (WCO) from palm oil is one of the most prospective biodiesel feedstock when compared to other oil seeds. Thus, WCO has great potential as a green source of diesel fuel for engines in motor vehicles and machinery. This project aimed to study the potential of three randomly selected types of WCO, namely; sample A (used 1× once to fry an egg), sample B (used 3–5× to fry salted fish), and sample C (used repeatedly to fry banana fritter) for the production of green diesel fuel over Ni-Mo/AC (nickel and molybdenum oxides incorporated with activated carbon) catalyst through the deoxygenation (DO) process. The prepared catalyst was characterized through X-ray diffraction (XRD), thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FESEM). The DO process was performed at 350 °C to remove oxygen from the WCO samples. The liquid products were analysed by gas chromatography-mass spectrometer (GC-MS) and gas chromatography-flame ionization detector (GC-FID), to measure the yields of straight-chain hydrocarbons and fractions in the range C8‒C20. Results showed that the highest n-(C8‒C20) hydrocarbon fractions were produced in the order of sample B (89.93%) > C (88.84%) > A (82.81%).Keywords
Funding Information
- Universiti Putra Malaysia (9671301)
This publication has 33 references indexed in Scilit:
- Microwave-heated pyrolysis of waste automotive engine oil: Influence of operation parameters on the yield, composition, and fuel properties of pyrolysis oilFuel, 2012
- Aqueous-phase hydrodeoxygenation of propanoic acid over the Ru/ZrO2 and Ru–Mo/ZrO2 catalystsApplied Catalysis A: General, 2012
- Renewable fuels via catalytic hydrodeoxygenationApplied Catalysis A: General, 2011
- Synergy effect in the HDO of phenol over Ni–W catalysts supported on active carbon: Effect of tungsten precursorsApplied Catalysis B: Environment and Energy, 2010
- Conversion of Triglycerides to Hydrocarbons Over Supported Metal CatalystsTopics in Catalysis, 2010
- Catalytic Hydrocracking of Fresh and Used Cooking OilIndustrial & Engineering Chemistry Research, 2009
- Waste Cooking Oil as an Alternate Feedstock for Biodiesel ProductionEnergies, 2008
- Effect of acidity and metal content on the activity and product selectivity for n-decane hydroisomerization and hydrocracking over nickel–tungsten supported on silica–alumina catalystsApplied Catalysis A: General, 2005
- A chemical synthetic route for the preparation of fine-grained metal molybdate powdersMaterials Letters, 2002
- Low-temperature synthesis of nano-sized metal molybdate powdersMaterials Letters, 2001