The effect of poly ethylene glycol additive on the characteristics and performance of cellulose acetate ultrafiltration membrane for removal of Cr(III) from aqueous solution
Open Access
- 11 May 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 352 (1) , 012051
Abstract
The effect of polyethylene glycol (PEG) additive on the characteristics and performance of the cellulose acetate ultrafiltration membrane to chromium metal removal has been studied using some variation of concentration in the casting solution. The concentration of cellulose acetate polymer was 17.5%, whereas the variations of PEG concentration were regulated at 0, 2.5, 5, 7.5 and 10% by weight. Dimethyl formamide (DMF) was used as a solvent. Pure water flux, membrane morphology test, functional group analysis, and molecular weight cut off (MWCO) were investigated to characterize of the prepared membranes. Membrane performance was tested against Cr(III) metal removal. The results confirmed that the pure water flux improved with the increasing of additive concentration. The maximum improvement occurred at membrane with modification using 7.5% PEG. At this PEG concentration, the pure water flux elevated from 49.5 L/m2.h to 62.2 L/m2.h. The addition of PEG successfully improved the membrane flux because the role PEG plays as a pore-forming agent. Membrane with addition of 7.5% PEG showcased rejection result for chromium metal of 31.89%. This value is lower than that of pure CA membrane which rejection value against Cr(III) metal amounted to 35.72%.Keywords
This publication has 11 references indexed in Scilit:
- A new high performance polyamide as an effective additive for modification of antifouling properties and morphology of asymmetric PES blend ultrafiltration membranesMicroporous and Mesoporous Materials, 2017
- Modification of polyethersulfone hollow fiber membrane with different polymeric additivesMembrane Water Treatment, 2016
- Preparation of poly (vinyl butyral) hollow fiber ultrafiltration membrane via wet-spinning method using PVP as additiveDesalination, 2011
- Effect of PEG additive on the morphology and performance of polysulfone ultrafiltration membranesDesalination, 2011
- Effect of solvents on performance of polyethersulfone ultrafiltration membranes: Investigation of metal ion separationsDesalination, 2011
- Cellulose acetate (CA)/polyvinylpyrrolidone (PVP) blend asymmetric membranes: Preparation, morphology and performanceDesalination, 2009
- Preparation and Characterization of Cellulose Acetate/Aminated Polysulfone Blend Ultrafiltration Membranes and their Application StudiesSeparation Science and Technology, 2009
- ULTRAFILTRATION MEMBRANE FORMATION OF PES-C, PES AND PPESK POLYMERS WITH DIFFERENT SOLVENTSChinese Journal of Polymer Science, 2009
- Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additivesDesalination, 2007
- Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizationsPolymers for Advanced Technologies, 2004