Cu-Cu Thermocompression Bonding with a Self-Assembled Monolayer as Oxidation Protection for 3D/2.5D System Integration
Open Access
- 30 June 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (7) , 1365
Abstract
Cu-Cu direct interconnects are highly desirable for the microelectronic industry as they allow for significant reductions in the size and spacing of microcontacts. The main challenge associated with using Cu is its tendency to rapidly oxidize in air. This research paper describes a method of Cu passivation using a self-assembled monolayer (SAM) to protect the surface against oxidation. However, this approach faces two main challenges: the degradation of the SAM at room temperature in the ambient atmosphere and the monolayer desorption technique prior to Cu-Cu bonding. In this paper, the systematic investigation of these challenges and their possible solutions are presented. The methods used in this study include thermocompression (TC) bonding, X-ray photoelectron spectroscopy (XPS), shear strength testing, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The results indicate nearly no Cu oxidation (4 at.%) for samples with SAM passivation in contrast to the bare Cu surface (27 at.%) after the storage at −18 °C in a conventional freezer for three weeks. Significant improvement was observed in the TC bonding with SAM after storage. The mean shear strength of the passivated samples reached 65.5 MPa without storage. The average shear strength values before and after the storage tests were 43% greater for samples with SAM than for the bare Cu surface. In conclusion, this study shows that Cu-Cu bonding technology can be improved by using SAM as an oxidation inhibitor, leading to a higher interconnect quality.Keywords
Funding Information
- Graduate Academy (IPID4all: 2018_83)
This publication has 39 references indexed in Scilit:
- Low temperature CuCu thermo-compression bonding with temporary passivation of self-assembled monolayer and its bond strength enhancementMicroelectronics Reliability, 2012
- Oxidation protection of copper surfaces using self-assembled monolayers of octadecanethiolApplied Surface Science, 2005
- Self-Assembled Monolayers of Thiolates on Metals as a Form of NanotechnologyChemical Reviews, 2005
- Stress-induced stacking faults in the Cu/Au interfaceJournal of Physics: Condensed Matter, 2004
- A thermal stability study of alkane and aromatic thiolate self-assembled monolayers on copper surfacesSuperlattices and Microstructures, 2004
- Mechanism of Copper Removal during CMP in Acidic H[sub 2]O[sub 2] SlurryJournal of the Electrochemical Society, 2004
- Development of gold to gold interconnection flip chip bonding for chip on suspension assembliesMicroelectronics Reliability, 2002
- Stability and Self-Exchange in Alkanethiol MonolayersJournal of the American Chemical Society, 1995
- Self-assembled monolayers of n-alkanethiolates on copper are barrier films that protect the metal against oxidation by airJournal of the American Chemical Society, 1992
- X‐ray photoelectron spectroscopy analysis of copper and zinc oxides and sulphidesSurface and Interface Analysis, 1992