Various factors which affect the tensile stress-at-break (σb) and the corresponding ultimate extension ratio (λb) of unfilled amorphous elastomers are considered. Such ultimate properties can be characterized by a failure envelope which is independent of the test temperatures and apparently of the stress-strain-time history prior to rupture. The envelope results from a plot of log σbT0/T against log (λb — 1), where T and T0 are, respectively, the test temperature and an arbitrary reference temperature, both expressed in degrees absolute. Characteristics of failure envelopes are illustrated in terms of data obtained at various rates of extension over extended temperature ranges on unfilled vulcanizates of silicone, butyl, styrene-butadiene, Viton (hydrofluorocarbon), and natural rubber. It is shown that the high-temperature segment of a failure envelope is identical to the near-equilibrium stressstrain curve and that the envelopes for vulcanizates having different cross-link densities yield a master envelope on a plot of log λbσbT0/T against log Ee( λb — 1 )T0/T, where is the true λbσb stress-at-break and Ee is the equilibrium modulus. On this type of plot, envelopes for all vulcanizates studied, except those of silicone and natural rubber, are essentially identical. Effects resulting from crystallization prior to rupture are discussed briefly in terms of data obtained on the natural rubber vulcanizate at temperatures below 90°C.