Optimal finite state predictive direct torque control without weighting factors for motor drive applications
Open Access
- 1 May 2019
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 12 (6) , 1434-1444
Abstract
An optimal finite state predictive direct torque control without flux and switching frequency weighting factors (WFs) is proposed to avoid the tuning of WFs and to provide high dynamic performances with reduced switching frequency and computational burden. The proposed method is a combination of the well‐known direct torque control and multi‐objective ranking (MOR) priority methods. The classical MOR, used to avoid the flux WF, increases the computation time compared to the standard predictive torque control (PTC) and does not consider switching frequency issues. These drawbacks impose the need for high sampling rates, which increase the implementation cost and the inverter power losses, an important issue for medium and high‐power drives. In the proposed method, the direct torque control principle is used to reduce the number of voltage vectors from eight to three, which reduces the computational burden of MOR. Also, MOR is associated with a proposed priority scheme to reduce the switching frequency and avoid WFs. Simulation and experimental results confirm that similar steady‐state response as in the traditional PTC based on MOR is obtained. However, fast transient response is achieved, the computational burden is reduced by about 25%, and the switching frequency is substantially reduced compared to classical PTC.Keywords
Funding Information
- Fuzhou University
This publication has 40 references indexed in Scilit:
- Model predictive torque control of induction motor drives with reduced torque rippleIET Electric Power Applications, 2015
- Generalised look‐up table concept for direct torque control in induction drives with multilevel invertersIET Electric Power Applications, 2015
- Two-Vector-Based Model Predictive Torque Control Without Weighting Factors for Induction Motor DrivesIEEE Transactions on Power Electronics, 2015
- Model Predictive Current Control of Grid-Connected Neutral-Point-Clamped Converters to Meet Low-Voltage Ride-Through RequirementsIEEE Transactions on Industrial Electronics, 2014
- Generalized Two-Vector-Based Model-Predictive Torque Control of Induction Motor DrivesIEEE Transactions on Power Electronics, 2014
- Model Predictive Torque Ripple Reduction with Weighting Factor Optimization Fed by an Indirect Matrix ConverterElectric Power Components and Systems, 2014
- Review of predictive control methods to improve the input current of an indirect matrix converterIET Power Electronics, 2014
- Direct Torque Control of Permanent-Magnet Synchronous Machine Drives With a Simple Duty Ratio RegulatorIEEE Transactions on Industrial Electronics, 2014
- Cascade-Free Predictive Speed Control for Electrical DrivesIEEE Transactions on Industrial Electronics, 2013
- Direct Torque Control of PWM Inverter-Fed AC Motors—A SurveyIEEE Transactions on Industrial Electronics, 2004