On the mechanical behaviour of a coral silt from the South China Sea

Authors:
Publisher website
Google Scholar
Abstract
During land reclamation on the reef islands, large amounts of silt-sized coral soils were created by segregation and degradation. The accumulation of silt-sized coral soils is fairy uncommon while the research on the geotechnical properties of the coral silt is very limited. In this study, a systematic experimental investigation on the mechanical behaviour of a coral silt obtained from a reclaimed reef island in the South China Sea has been performed, with comparisons to the coral sand collected from the same area. Similar to the coral sand, the coral silt particles also exhibit irregular particle shape and intra-particle pore due to their nature origin. According to the limiting water contents, the coral silt is classified as a low-plasticity clayey silt. Under one-dimensional compression, the coral silt exhibits a much quicker convergence compared to coral sand. Prior to convergence, the compressibility of coral silt is higher. After yielding, the compressibility of coral sand becomes higher due to significant particle breakage. The loose coral silt subjected to undrained shearing at low confining pressures exhibits obvious strain softening behaviour, indicating static liquefaction or flow failure. The peak and critical state friction angles of coral silt are lower than those of coral sand but much higher than those of the other terrigenous clayey silts. A curved critical state line with well-defined horizontal asymptote in the deviatoric stress – mean effective stress plane is identified for coral silt, again indicating higher potential to static liquefaction.

This publication has 53 references indexed in Scilit: