Effect of Presoaked Expanded Perlite Aggregate on the Dimensional Stability and Mechanical Properties of Engineered Cementitious Composites
- 1 June 2013
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (6) , 763-771
Abstract
This paper reports on an investigation of the use of expanded perlite aggregate as saturated lightweight aggregate (LWA) with respect to the mechanical and dimensional stability properties of engineered cemetitious composites (ECC). Expanded perlite aggregate was soaked in water for 24 h before its use in ECC, and replaced 10, 20, and 30% of the aggregate that was used in ECC production. The mixture proportion of a standard ECC mixture with properties that have been extensively reported in the literature is used as a reference. The properties of the specimens are compared in terms of compressive strength, flexural strength, midspan beam deflection capacity, matrix fracture toughness, drying shrinkage, autogenous shrinkage, and restrained shrinkage. The compressive strength and flexural strength of the specimens were adversely affected with presoaked LWA replacement. Midspan beam deflection capacities were partially improved, whereas matrix fracture toughness values decreased by the presoaked LWA r...Keywords
This publication has 13 references indexed in Scilit:
- Optimisation of using lightweight aggregates in mitigating autogenous deformation of concreteConstruction and Building Materials, 2009
- Simplified Inverse Method for Determining the Tensile Strain Capacity of Strain Hardening Cementitious CompositesJournal of Advanced Concrete Technology, 2007
- Pumice aggregates for internal water curing2004
- DESIGN OF ENGINEERED CEMENTITIOUS COMPOSITES (ECC) FOR PROCESSING AND WORKABILITY REQUIREMENTS2003
- On Engineered Cementitious Composites (ECC)Journal of Advanced Concrete Technology, 2003
- Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregatesCement and Concrete Research, 2001
- Protected paste volume in concreteCement and Concrete Research, 1999
- Crack bridging in fiber reinforced cementitious composites with slip-hardening interfacesJournal of the Mechanics and Physics of Solids, 1997
- Matrix design for pseudo-strain-hardening fibre reinforced cementitious compositesMaterials and Structures, 1995
- Creep and shrinkage prediction model for analysis and design of concrete structures— model B3Materials and Structures, 1995