A Novel Ultra-Broadband Low-Loss Bond-Wire Interconnect Design Concept Applied to a 2 GHz to 135 GHz Substrate-to-Substrate Interface
Authors:
- 11 June 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 474-477
Abstract
This work presents a design concept for ultra-broadband bond-wire interconnects between two alumina substrates from 2 GHz up to 135 GHz. Due to the rethinking of the substrate assembly and optimization of the CPW bond-wire transmission line interface, the currently existing limitations in terms of a narrowband matching bandwidth and high insertion loss of state-of-the-art interconnects can be eliminated. The resulting key advantage of the proposed design is the ultra-broadband characteristic that exhibits lowest impedance discontinuity and thus realizing an excellent matching bandwidth of more than 130 GHz. The measured return loss is higher than 25 dB with an insertion loss of less than 1.6 dB over the entire frequency band. The paper highlights both, the electric considerations as signal routing and the assembly part for achieving a robust, reproducible and fully mmW-transparent interconnect even beyond 100 GHz. Due to the broadband performance and the high agreement of simulation and measurement results the proposed interconnect and the underlying design and assembly considerations set a new benchmark for interconnect design. Moreover, this approach can be used for signal transitions in applications such as broadband communication systems, high-resolution radar sensing and measurement and test applications.Keywords
Funding Information
- Ministry of Economic Affairs
This publication has 7 references indexed in Scilit:
- Connecting Chips With More Than 100 GHz BandwidthIEEE Journal of Microwaves, 2021
- Ultrawide Bandwidth Chip-to-Chip Interconnects for III-V MMICsIEEE Microwave and Wireless Components Letters, 2013
- A Low-Cost DC-to-84-GHz Broadband Bondwire Interconnect for SoP Heterogeneous System IntegrationIEEE Transactions on Microwave Theory and Techniques, 2013
- 122-GHz chip-to-antenna wire bond interconnect with high repeatability2012
- Millimeter-Wave Technology for Automotive Radar Sensors in the 77 GHz Frequency BandIEEE Transactions on Microwave Theory and Techniques, 2012
- A 100GHz Bandwidth Matched Chip to PCB Transition Using Bond Wires for Broadband Matching2008
- The flip-chip approach for millimeter wave packagingIEEE Microwave Magazine, 2005