Detection of the LOS/NLOS state change based on the CIR features
Authors:
- 1 July 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 110-114
Abstract
As one of the most promising indoor localization technologies, ultra-wide band (UWB) system attracts lots of attentions due to its high accuracy, low complexity and low-power consumption. However, as one of the most important factors to guarantee accurate position estimation, accurate non-line-of-sight (NLOS) detection remains as a very challenging problem. During the experiments, if the mobile station (MS) move from line-of-sight (LOS) state to NLOS state or from NLOS state to LOS state, dramatic change of the features extracted from channel impulse response (CIR) can be observed. However, if the MS stays in the same state, no big changes can be observed. Based on these observation, four approaches (moving average based, slope based-, wavelet based-, and time series analysis based approach) are proposed to identify the CIR state change (LOS to LOS, LOS to NLOS, NLOS to NLOS and NLOS to LOS). If the initial state is known, the current state can be determined with the accurate state change identification.Keywords
This publication has 9 references indexed in Scilit:
- UWB NLOS identification with feature combination selection based on genetic algorithm2019
- UWB TDOA/TOA measurement system with wireless time synchronization and simultaneous tag and anchor positioning2018
- Simulation Research of UWB location algorithm2018
- A novel NLOS mitigation approach for TDOA based on IMU measurements2018
- UWB/IMU integration approach with NLOS identification and mitigation2018
- Real-time identification of NLOS range measurements for enhanced UWB localization2017
- NLOS identification and compensation for UWB ranging based on obstruction classification2017
- Customization of UWB 3D-RTLS Based on the New Uncertainty Model of the AoA Ranging TechniqueSensors, 2017
- Survey of NLOS identification and error mitigation problems in UWB-based positioning algorithms for dense environmentsAnnals of Telecommunications, 2009