Scuffing Resistance of Selected Materials as Protection for Bores in Aluminum Engine Blocks
Authors:
- 1 February 1992
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper describes alternatives for cylinder bore protection based on liners fabricated from hypereutectic A1-Si alloys, A1 based metal matrix composites, and hard oxide, plasma sprayed synthetic iron and electrodeposited Ni-SiC coatings. An effective and economical bench test was developed which simulated the interactions of piston rings and cylinder bore surfaces to rank the different alternative materials. Scuffing was characterized microscopically by material transfer between the ring and the cylinder bore surface. The scuffing resistance was rated by the scuffing-start time under different pressures exerted by the ring against the liner. The experimental results showed that among all alternative materials, hard oxide and electrodeposited Ni-SiC coatings had the best scuffing resistance; however, damage to the piston rings was observed. Hypereutectic A1-Si alloys and A1 based composites also are acceptable, but less abrasive to the ring.Keywords
This publication has 5 references indexed in Scilit:
- Production Process of Metal Matrix Composite (MMC) Engine BlockSAE International Journal of Advances and Current Practices in Mobility, 1991
- The Mechanics of Plastic Deformation of Surface and Subsurface Layers in Rolling And Sliding ContactKey Engineering Materials, 1991
- Reynolds 390 Engine TechnologySAE International Journal of Advances and Current Practices in Mobility, 1983
- Experiences with Nickel-Silicon-Carbide Coatings in Cylinder Bores of Small Aluminum EnginesSAE International Journal of Advances and Current Practices in Mobility, 1979
- The Vega 2300 EngineSAE International Journal of Advances and Current Practices in Mobility, 1971