Influence of seasonal, technical, and lithological parameters on exposure to dust and crystalline silica in the French natural stone industry
Authors:
- 18 December 2025
- journal article
- Published by Oxford University Press (OUP) in Annals of Work Exposures and Health
- Vol. 70 (2)
Abstract
European directives play a key role in establishing occupational exposure limit values within the European Union. Directive 98/24/EC and national regulations, such as French Decree 2021-1763, have recently introduced strict limits for exposure to non-specific dust, significantly impacting sectors such as natural stone processing. This study analyzes workers' exposure to inhalable and respirable dust across 8 representative industrial facilities in France, focusing on granite, hard limestone, soft limestone, and sandstone. Measurements were conducted to quantify exposure levels across 5 different processes, considering key parameters such as seasonal variations, wet and dry processes, as well as dust reduction measures. Results show significant seasonal fluctuations, with higher exposures in summer, particularly during granite finishing work, where inhalable dust concentrations exceeded regulatory thresholds by up to 120 times. Wet processes demonstrated effective dust reduction, decreasing concentrations by more than 90% compared to dry methods. However, exposure to crystalline silica frequently exceeds regulatory limits, highlighting a persistent health risk for workers. The study also assessed the effectiveness of technical devices, such as suction booths and water curtains, as well as the impact of wearing a mask on occupational exposure. If suction booths and hoses have proven to be highly effective, their performance remains limited during high-emission operations. In that case and in the absence of adequate engineering controls, filtering facepiece (FFP3) masks would be appropriate.Keywords
Funding Information
- CTMNC
- CTMNC
- Université de Lorraine
This publication has 9 references indexed in Scilit:
- Ethics and Privacy Considerations Before Deploying Sensor Technologies for Exposure Assessment in the Workplace: Results of a Structured Discussion Amongst Dutch StakeholdersAnnals of Work Exposures and Health, 2020
- Caractérisation des expositions professionnelles à la silice cristalline–expertise AnsesArchives des Maladies Professionnelles et de l'Environnement, 2020
- Life Cycle Inventory of techniques for stone quarrying, cutting and finishing: Contribution to fill data gaps.Journal of Cleaner Production, 2019
- Exposure to Respirable Crystalline Silica in the GB Brick Manufacturing and Stone Working IndustriesAnnals of Work Exposures and Health, 2019
- Silica Exposure, Silicosis, and the New Occupational Safety and Health Administration Silica Standard. What Pulmonologists Need to KnowAnnals of the American Thoracic Society, 2018
- Sampling Efficiency and Performance of Selected Thoracic Aerosol SamplersAnnals of Work Exposures and Health, 2017
- Performance of High Flow Rate Personal Respirable Samplers When Challenged with Mineral Aerosols of Different Particle Size DistributionsAnnals of Occupational Hygiene, 2016
- Exposure Estimation and Interpretation of Occupational Risk: Enhanced Information for the Occupational Risk ManagerJournal of Occupational and Environmental Hygiene, 2015
- EXPOSURE VARIABILITY IN THE WORKPLACE: ITS IMPLICATIONS FOR THE ASSESSMENT OF COMPLIANCEAIHA Journal, 1991