Separation and characterization studies of end-of-life mobile printed circuit boards
- 30 April 2020
- journal article
- research article
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 39 (4) , 467-474
Abstract
Separation and characterization studies were carried out on end-of-life mobile printed circuit boards (EoL Mobile PCBs). The raw material has been subjected to a hammer mill to reduce the particle size. A series of comminution experiments were conducted to produce different size particles, which indicates that a number of crushing stages are needed to generate finer products. Comminution products consist of fine hydrophilic metals and hydrophobic nonmetal particles. Further, flotation studies were conducted to separate metals and nonmetals. The experimental results indicated that the product grade of 84–90% metals could be achieved from the feed containing 48% metals and recovery values varying between 44 and 66%. Characterization of the feed and flotation products was carried out following stereomicroscope and scanning electron microscope. The stereomicroscopic investigations show that the metallic particles were irregular in shape and the majority of them were liberated and few interlocks observed with the plastic/nonmetallic materials. The scanning electron microscope studies showed the presence of different metallic phases in the flotation products.Keywords
This publication has 25 references indexed in Scilit:
- The influence of waste printed circuit boards characteristics and nonmetal surface energy regulation on flotationWaste Management, 2018
- Recovery of metallic concentrations from waste printed circuit boards via reverse floatationWaste Management, 2017
- Waste Printed Circuit Boards recycling: an extensive assessment of current statusJournal of Cleaner Production, 2015
- Milling and Classification of Printed Circuit Boards for Material RecyclingParticulate Science and Technology, 2015
- Conventional flotation techniques to separate metallic and nonmetallic fractions from waste printed circuit boards with particles nonconventional sizeJournal of Mining Science, 2014
- Printed wiring boards for mobile phones: Characterization and recycling of copperWaste Management, 2011
- Recycling of waste printed circuit boards: A review of current technologies and treatment status in ChinaJournal of Hazardous Materials, 2009
- Metallurgical recovery of metals from electronic waste: A reviewJournal of Hazardous Materials, 2008
- Classification of metals and plastics from printed circuit boards (PCB) using air classifierChemical Engineering and Processing - Process Intensification, 2008
- Impact Milling of Printed Circuit Board Waste for Resource Recycling and Evaluation of Liberation using Heavy Medium Separation [Translated]†KONA Powder and Particle Journal, 2000