Reactive Extrusion Grafting of Glycidyl Methacrylate onto Low-Density and Recycled Polyethylene Using Supercritical Carbon Dioxide
Open Access
- 16 March 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 3022
Abstract
Glycidyl methacrylate (GMA) was grafted onto (recycled) polyethylene (PE) to design a new adhesive with better mechanical properties compared to non-grafted PE. The effects of the amount of GMA, the amount of dicumyl peroxide (DCP) and the use of supercritical carbon dioxide (scCO2) in a reactive extrusion (REX) were evaluated based on the grafting degree and efficiency of the grafted samples. Generally speaking, higher amounts of GMA led to higher functionalization degrees (FD), whereas higher amounts of DCP resulted in a lower FD due to the occurrence of more unfavorable side reactions. The influence of scCO2 showed different outcomes for the two substrates used. Higher FDs were obtained for the low-density polyethylene (LDPE) samples while, by contrast, lower FDs were obtained for the recycled polyethylene (RPE) samples when using scCO2. Additionally, adjusting the screw speed and the temperature profile of the extruder to the half-life time of the radical initiator appeared to have the highest positive impact on the FD. According to the tensile tests, all the grafted samples can withstand higher stress levels, especially the grafted RPE, compared to the non-grafted samples.Keywords
Funding Information
- SNN (Northern Netherlands Alliance) and Province of Groningen (n.a.)
This publication has 37 references indexed in Scilit:
- Characterization of polypropylene–polyethylene blends made of waste materials with compatibilizer and nano-fillerComposites Part B: Engineering, 2013
- Reconsideration on the mechanism of free-radical melt grafting of glycidyl methacrylate on polyolefinPolymer, 2012
- Investigation of styrene‐assisted free‐radical grafting of glycidyl methacrylate onto high‐density polyethylene using response surface methodJournal of Applied Polymer Science, 2008
- Preparation of epoxy-modified polyethylene by graft extrusion and its applications to polyphenylene sulfide alloys as a compatibilizerReactive and Functional Polymers, 2008
- Polypropylene grafted with glycidyl methacrylate using supercritical CO2 mediumBrazilian Journal of Chemical Engineering, 2006
- Reactive Compatibilization of PA6/LDPE Blends with Glycidyl Methacrylate Functionalized PolyolefinsMacromolecular Chemistry and Physics, 2005
- Measurement and prediction of LDPE/CO2 solution viscosityPolymer Engineering & Science, 2002
- Grafting of methyl methylacrylate onto isotactic polypropylene film using supercritical CO 2 as a swelling agentPolymer, 2002
- Grafting of 2-Hydroxyethyl Methacrylate onto Isotactic Poly(propylene) Using Supercritical CO2 as a Solvent and Swelling AgentMacromolecular Chemistry and Physics, 2001
- Reactive compatibilization of polyolefin/PET blends by melt grafting with glycidyl methacrylateMacromolecular Symposia, 2000