Comparison between Mechanical Properties of Dam and Sieved Concretes
- 1 April 2008
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 20 (4) , 321-326
Abstract
This technical note presents the behavior of dam and sieved concretes in uniaxial tension and compression together with the effects of curing age on large size specimens of (prism shape) and (cube shape) and small size specimens of and , respectively. The complete stress–strain curves both in tension and compression were acquired through a systematic experimental program. The specimen ages varied from 7 to 180 days. Models with hyperbolic form are proposed to estimate the tensile and compressive strengths, the elastic modulus, and the fracture parameters of the concretes with effects of specimen ages. On top of that, the maximum crack width, fracture energy, and brittleness of dam concretes were also obtained based on the stress–deformation curves. It was found that the strengths, modulus of elasticity, and fracture energy increase with specimen age, and that the specimen size and maximum aggregate diameter significantly affect the fracture energy, peak strain, and crack width of concretes in uniaxial tension.
Keywords
This publication has 4 references indexed in Scilit:
- Uniaxial tension test for the determination of fracture parameters of concrete: state of the artEngineering Fracture Mechanics, 2002
- Estimation of the Modulus of Elasticity for Dam ConcreteCement and Concrete Research, 1998
- Direct tension tests on notched and un-notched plain concrete specimensMagazine of Concrete Research, 1993
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976