Influence of the Pulse Mode of Manual Metal Arc Welding on Weldment Distortions
Open Access
Abstract
As a result of the thermo-mechanical impact during welding, distortions are generated in welded structures. These distortions significantly influence the geometric and dimensional accuracy of welded structures, in many cases lowering their working characteristics and reliability. An optimal design for welded structures is a prerequisite for increased reliability and reduction in manufacturing cost, and such an optimal design can be achieved knowing the distortions in weldments. Despite the fact that pulsed metal inert gas welding and metal active gas welding have been broadly applied in the last few decades, nowadays, few manufacturers, for instance, Fronius, EWM, Redco, and Perfect Power Welders, offer such an option for manual arc welding. This work aims to determine the influence of the parameters of pulsed welding modes on distortions that are generated during manual arc welding. Two different inverter welding power sources were used, and the welding distortions were measured by 3D scanning. The results showed that the pulsed mode during manual arc welding led to a reduction in distortions compared to the conventional welding mode. The crucial part of the manual welding system proved to be the qualification and performance of the welder.Keywords
Funding Information
- European Union, NextGenerationEU, through the National Recovery and Resilience Plan of the Republic of Bulgaria (BG-RRP-2.013-0001-C01)
This publication has 16 references indexed in Scilit:
- Prediction of the welding distortions of butt welded joints using total moments method based on equivalent loadsJournal of Manufacturing Processes, 2022
- Experimental and numerical investigation of fixture time on distortion of welded partThe International Journal of Advanced Manufacturing Technology, 2019
- Control of welding distortion during gas metal arc welding of AH36 plates by stress engineeringThe International Journal of Advanced Manufacturing Technology, 2016
- Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plate bead-on jointsMaterials & Design (1980-2015), 2013
- Welding process impact on residual stress and distortionScience and Technology of Welding and Joining, 2009
- FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effectsMaterials & Design (1980-2015), 2009
- Selection of parameters of pulsed current gas metal arc weldingJournal of Materials Processing Technology, 2006
- The effect of pulsed GTA welding on the residual stress of a stainless steel weldmentJournal of Materials Processing Technology, 2002
- Effect of pulsed gas tungsten arc welding on angular distortion in austenitic stainless steel weldmentsScience and Technology of Welding and Joining, 2001
- Theoretical Analysis of Weld Pool Behavior in the Pulsed Current GTAW ProcessJournal of Heat Transfer, 1988