Shock-Wave/Boundary-Layer Interactions in Transitional Rectangular Duct Flows
Open Access
- 23 April 2020
- journal article
- research article
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 105 (2) , 649-670
Abstract
Shock-wave/boundary-layer interactions (SBLI) are an important feature of high-speed gas dynamics. In many numerical studies of SBLI span-periodicity is assumed to reduce computational complexity. However, span-periodicity is not a valid assumption for aeronautical applications such as supersonic engine intakes where lateral confinement leads to highly three-dimensional behaviour. In this work transitional oblique SBLI are simulated for a rectangular duct with a $$\theta _{sg} = 5^{\circ }$$ shock generator ramp at Mach 2. The baseline configuration is a duct with an aspect ratio of 0.5. Time-dependent disturbances are added to the base laminar flow via wall localised blowing/suction strips to obtain intermittent transition upstream of the SBLI. Two forcing configurations are evaluated to assess the response of the SBLI to different tripping locations. The transition is observed to develop first in the low-momentum corners of the duct and spread out in a wedge shape. The central separation bubble is seen to react dynamically to oncoming turbulent spots, shifting laterally across the span. While instantaneous corner separations do occur, the time-averaged corner flow remains attached. Comparisons to a one-to-one aspect ratio duct show that the SBLI is heavily dependent on aspect ratio; the wider duct exhibited significantly larger regions of flow-reversal due to a strengthened interaction.
Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/L015382/1)
This publication has 35 references indexed in Scilit:
- A Targeted ENO Scheme as Implicit Model for Turbulent and Genuine Subgrid ScalesCommunications in Computational Physics, 2019
- Response of an oblique shock train to downstream periodic pressure perturbationsProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2017
- Numerical Investigation of Shock-Train Response to Inflow Boundary-Layer VariationsAIAA Journal, 2017
- A family of high-order targeted ENO schemes for compressible-fluid simulationsJournal of Computational Physics, 2016
- A comparison of higher-order finite-difference shock capturing schemesComputers & Fluids, 2015
- Confinement effects in shock wave/turbulent boundary layer interactions through wall-modelled large-eddy simulationsJournal of Fluid Mechanics, 2014
- Corner separation effects for normal shock wave/turbulent boundary layer interactions in rectangular channelsJournal of Fluid Mechanics, 2012
- Corner effect and separation in transonic channel flowsJournal of Fluid Mechanics, 2011
- An improved weighted essentially non-oscillatory scheme for hyperbolic conservation lawsJournal of Computational Physics, 2008
- Fifty Years of Shock-Wave/Boundary-Layer Interaction Research: What Next?AIAA Journal, 2001