Grafting Benzenediazonium Tetrafluoroborate onto LiNixCoyMnzO2 Materials Achieves Subzero‐Temperature High‐Capacity Lithium‐Ion Storage via a Diazonium Soft‐Chemistry Method
- 17 December 2018
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 9 (6)
Abstract
Subzero‐temperature Li‐ion batteries (LIBs) are highly important for specific energy storage applications. Although the nickel‐rich layered lithium transition metal oxides(LiNixCoyMnzO2) (LNCM) (x > 0.5, x + y +z = 1) are promising cathode materials for LIBs, their very slow Li‐ion diffusion is a main hurdle on the way to achieve high‐performance subzero‐temperature LIBs. Here, a class of low‐temperature organic/inorganic hybrid cathode materials for LIBs, prepared by grafting a conducting polymer coating on the surface of 3 µm sized LiNi0.6Co0.2Mn0.2O2 (LNCM‐3) material particles via a greener diazonium soft‐chemistry method is reported. Specifically, LNCM‐3 particles are uniformly coated with a thin polyphenylene film via the spontaneous reaction between LNCM‐3 and C6H5N2+BF4−. Compared with the uncoated one, the polyphenylene‐coated LNCM‐3 (polyphenylene/LNCM‐3) has shown much improved low‐temperature discharge capacity (≈148 mAh g−1 at 0.1 C, −20 °C), outstanding rate capability (≈105 mAh g−1 at 1 C, −20 °C), and superior low‐temperature long‐term cycling stability (capacity retention is up to 90% at 0.5 C over 1150 cycles). The low‐temperature performance of polyphenylene/LNCM‐3 is the best among the reported state‐of‐the art cathode materials for LIBs. The present strategy opens up a new avenue to construct advanced cathode materials for wider range applications.Keywords
Funding Information
- National Natural Science Foundation of China (21527806, 21727815, 21505127, 21622509, 21475122)
This publication has 36 references indexed in Scilit:
- Review on Challenges and Recent Advances in the Electrochemical Performance of High Capacity Li‐ and Mn‐Rich Cathode Materials for Li‐Ion BatteriesAdvanced Energy Materials, 2017
- Prospect and Reality of Ni‐Rich Cathode for CommercializationAdvanced Energy Materials, 2017
- High-energy-density lithium-ion battery using a carbon-nanotube–Si composite anode and a compositionally graded Li[Ni0.85Co0.05Mn0.10]O2 cathodeEnergy & Environmental Science, 2016
- Advanced Concentration Gradient Cathode Material with Two‐Slope for High‐Energy and Safe Lithium BatteriesAdvanced Functional Materials, 2015
- Understanding the trace Ti surface doping on promoting the low temperature performance of LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathodeJournal of Power Sources, 2015
- A New Coating Method for Alleviating Surface Degradation of LiNi0.6Co0.2Mn0.2O2 Cathode Material: Nanoscale Surface Treatment of Primary ParticlesNano Letters, 2015
- Progress in High-Capacity Core–Shell Cathode Materials for Rechargeable Lithium BatteriesThe Journal of Physical Chemistry Letters, 2014
- Electrochemical Properties of Polyaniline-Coated Li-Rich Nickel Manganese Oxide and Role of Polyaniline Coating LayerJournal of the Electrochemical Society, 2013
- Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteriesJournal of Power Sources, 2013
- Nanostructured high-energy cathode materials for advanced lithium batteriesNature Materials, 2012