Lead Zirconate Titanate (PZT) is a high energy density active material with good piezoelectric coefficient and electromechanical coupling constant making it highly suitable for microsystems applications. In this paper, we present a rapid anisotropic high aspect ratio etching process for defining micron size features in PZT. We used an inductively coupled plasma reactive ion etching (ICP-RIE) system employing sulfur hexafluoride (SF6) and argon (Ar) based chemistry. A seed layer of Au/Cr was lithographically patterned onto fine lap finished PZT-4 substrates followed by electrodeposition of a thick 2-5 μm nickel on the seed layer, which acts as a hard mask during the etching process. The demonstrated technique was used to etch bulk PZT ceramic substrates, thereby opening possibilities for integration of bulk PZT substrates and structures into microsystems. A maximum etch rate of 19 μm/hr on PZT-4 and 25 μm/hr for PZT-5A compositions was obtained using 2000 W of ICP power, 475 W of substrate power, 5 sccm of SF6, and 50 sccm of Ar on PZT substrate. We have also demonstrated a high aspect ratio etch (>5:1) on a 3 μm feature size. Detailed analysis of the effects of ICP power, substrate power, and the etch gas composition on the etch rate of PZT are also presented in this article.