Fabrication of highly transparent and conducting PEDOT:PSS films using a formic acid treatment
Authors:
- 18 November 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 2 (4) , 764-770
Abstract
The present work is focused on the development of transparent conductive polymer films and improving their conductivity. The films were produced using a commercially available poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) aqueous dispersion. To deposit the PEDOT:PSS an automated programmable spray system was used. This enabled spraying the PEDOT:PSS onto reasonably large heated substrates creating a smooth homogeneous film. The dimensions and thickness of the film can be controlled and size or area of the film is only limited by spraying system dimensions providing a readily up scalable film deposition technique. The sprayed films were produced on a range of polymer (e.g. PET, polycarbonate and dielectric elastomer 3M VHB) or glass substrates. Varying PEDOT:PSS film thicknesses (corresponding to films of various %T values of 75%) were deposited and characterised primarily by UV-vis and Raman spectroscopy, Atomic Force Microscopy (AFM) and 4-point resistance measurements. The untreated films showed a relatively poor sheet resistance to transparency ratio as expected. However, treatment of these films using methanol and formic acid resulted in a huge improvement in sheet resistance values in the range of 3–4 orders of magnitude from the untreated films. In addition, the FA treated PEDOT:PSS films showed greater stability and only a slight reduction in their conductivity over 200 h on atmospheric exposure. We believe that the improvement in conductive properties of PEDOT:PSS films and the easily up scalable fabrication by automated spraying opens up a range of potential applications including flexible displays, light emitting diodes, photovoltaic cells, sensors, window defrost systems, photo-chromic windows and sunroofs in cars.Keywords
This publication has 33 references indexed in Scilit:
- Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent ElectrodesAdvanced Functional Materials, 2011
- Highly stable Al-doped ZnO transparent conductors using an oxidized ultrathin metal capping layer at its percolation thicknessApplied Physics Letters, 2011
- Transparent Conductors from Carbon Nanotubes LBL-Assembled with Polymer Dopant with π−π Electron TransferJournal of the American Chemical Society, 2011
- Avoiding indiumNature Photonics, 2011
- Transparent Conductors from Layer-by-Layer Assembled SWNT Films: Importance of Mechanical Properties and a New Figure of MeritACS Nano, 2010
- Flexible, Transparent, Conducting Films of Randomly Stacked Graphene from Surfactant‐Stabilized, Oxide‐Free Graphene DispersionsSmall, 2010
- Development of transparent, conducting composites by surface infiltration of nanotubes into commercial polymer filmsCarbon, 2009
- Silver Nanowire Networks as Flexible, Transparent, Conducting Films: Extremely High DC to Optical Conductivity RatiosACS Nano, 2009
- Transparent conducting sol–gel ATO coatings for display applications by an improved dip coating techniqueThin Solid Films, 2006
- Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and FutureAdvanced Materials, 2000