Hybrid strengthening of RC beams with externally bonded carbon fiber reinforced polymer laminate and engineered cementitious composites transition layer
- 22 May 2024
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 27 (11) , 1849-1861
Abstract
This paper presents the experimental study on the reinforced concrete (RC) beam strengthened with externally bonded carbon fiber reinforced polymer (EB-CFRP) laminate and engineered cementitious composites (ECC) material. A total of six beams were tested under the four-point bending test to investigate the influence of strengthening scheme, type of CFRP laminate and the width of CFRP plate on the flexural response. The results revealed that hybrid strengthened beam with the technical of EB-CFRP and ECC transition layer significantly enhanced the crack load (29.0%–133.3%), yield load (50.9%–96.5%) and ultimate load (50.0%–81.9%) of the beams relative to the control beam. The employment of ECC material was an ideal transition layer for delaying the interfacial debonding of CFRP laminate, where the ultimate tensile strain of CFRP plate in hybrid strengthened beams was 13.2%–33.33% higher than that of beam merely strengthened with EB-CFRP plate. Beams strengthened with CFRP sheet had the greater flexural performance and higher utilization of CFRP than its counterparts strengthened with CFRP plate. Moreover, the predicted model associated with ultimate bearing capacity of the hybrid beams was provided based on ACI 440.2R-08, which was relatively conservative with a margin for the ultimate load of the hybrid strengthened beams.Keywords
Funding Information
- Natural Science Foundation of Shanghai Municipality (23ZR1462400)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX23_0283)
- National Natural Science Foundation of China (52108119)
- Natural Science Foundation of Jiangsu Province (BK20200376)
This publication has 30 references indexed in Scilit:
- Flexural behavior of GFRP reinforced concrete beams with CFRP grid-reinforced ECC stay-in-place formworksComposite Structures, 2021
- Strengthening of RC beams with externally bonded and anchored thick CFRP laminateComposite Structures, 2020
- A new model for calculating inclined single fiber bridging stress in Strain-Hardening Cementitious Composites based on beam theoryCement and Concrete Composites, 2019
- Durability, service life prediction, and modelling for reinforced concrete structures – review and critiqueCement and Concrete Research, 2019
- Contribution of externally bonded FRP shear reinforcement to the shear strength of RC beamsComposites Part B: Engineering, 2019
- Influence of microcrack self-healing behavior on the permeability of Engineered Cementitious CompositesCement and Concrete Composites, 2017
- Bond behaviors of FRP-to-concrete interface under the control of a novel end-anchorage systemComposite Structures, 2017
- Slip effects in reinforced concrete beams with mechanically fastened FRP stripCement and Concrete Composites, 2009
- FRP debonding from a concrete substrate: Some recent findings against conventional beliefCement and Concrete Composites, 2006
- A simplified micromechanical model of compressive strength of fiber-reinforced cementitious compositesCement and Concrete Composites, 1992