Electron Beam‐Induced Surface Modification on Nanochitosan‐Grafted 3D‐Printed Monoliths for Enhanced Wastewater Color Removal
Open Access
- 1 January 2025
- journal article
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Abstract
The utilization of 3D printing technology has brought about significant advancements in various industries, including wastewater treatment. 3D printing has garnered considerable attention due to its affordability, user‐friendliness, and ability to manufacture complex structures rapidly with minimal wastage, aligning with sustainability goals. This study aims to enhance the color removal efficiency and reduce the processing time in color removal using different electron beam (EB) irradiation treatments at 50 cGy (0.125 min), 100 cGy (0.25 min), and 200 cGy (0.5 min) on silane‐grafted nanochitosan of a 3D‐printed monolith for adsorption performance in a batch process. Using 200 cGy for 0.5 min, the highest removal efficiency of 96% with an adsorption capacity of 12.2 ± 0.7 mg/g was achieved within 80 min, compared to 2 h without EB irradiation treatments. Several characterization examinations were conducted to obtain a comprehensive understanding of the surface morphology and topology, chemical structure, and elemental compositions of the silane‐grafted nanochitosan. The results revealed that with increasing EB irradiation, the surface roughness changed, enhancing the adsorption performance for wastewater treatment.Keywords
Funding Information
- University of Nottingham Malaysia Campus
This publication has 48 references indexed in Scilit:
- The influence of structural topology of additively manufactured PEGDA monolith on adsorption performance for textile wastewater treatmentAsia-Pacific Journal of Chemical Engineering, 2023
- Sorption behavior of chitosan nanoparticles for single and binary removal of cationic and anionic dyes from aqueous solutionEnvironmental Science and Pollution Research, 2023
- Influence of chitosan source and degree of deacetylation on antibacterial activity and adsorption of AZO dye from waterBiomass Conversion and Biorefinery, 2023
- Adsorption studies of methyl orange dye removal from aqueous solution using Anchote peel-based agricultural waste adsorbentApplied Water Science, 2022
- Bio-sorptive Removal of Methyl Orange by Micro-Grooved Chitosan (GCS) Beads: Optimization of Process Variables Using Taguchi L9 Orthogonal ArrayJournal of Polymers and the Environment, 2020
- Dye removal by biosorption using cross-linked chitosan-based hydrogelsEnvironmental Chemistry Letters, 2019
- 3D-printed highly porous and reusable chitosan monoliths for Cu(II) removalJournal of Materials Science, 2019
- A facile way to prepare ceramic-supported graphene oxide composite membrane via silane-graft modificationApplied Surface Science, 2014
- Preparation, characterization and dye adsorption properties of γ-Fe2O3/SiO2/chitosan compositeApplied Surface Science, 2011
- Adsorption of dyes and heavy metal ions by chitosan composites: A reviewCarbohydrate Polymers, 2011