PCI-Express Based High-Speed Readout for the Belle II DAQ Upgrade
Open Access
- 4 June 2021
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (8) , 1818-1825
Abstract
Belle II is a new-generation B-factory experiment, dedicated to exploring new physics beyond the standard model of elementary particles in the flavor sector. Belle II started data-taking in April 2018, using a synchronous data acquisition (DAQ) system based on pipelined trigger flow control. The Belle II DAQ system is designed to handle a 30-kHz trigger rate with approximately 1% of dead time, under the assumption of a raw event size of 1 MB. The DAQ system is reliable, and the overall data-taking efficiency reached 84.2% during the run period of January 2020–June 2020. The current readout system cannot be operated in the terms of ten years from the viewpoint of DAQ maintainability; meanwhile, the readout system is obstructing high-speed data transmission. A solution involving a peripheral component interconnect (PCI)-express-based readout module with high data throughput of up to 100 Gb/s was adopted to upgrade the Belle II DAQ system. We particularly focused on the design of firmware and software based on this new generation of readout board, called PCIe40, with an Altera Arria 10 field-programmable gate array chip. The 48-Gb transceiver (GBT) serial links, PCI-express hard IP-based direct memory access (DMA) architecture, interface of timing and trigger distribution system, and slow control system were designed to integrate with the current Belle II DAQ system. This article describes the performances accomplished during the data readout and slow control tests conducted using a test bench and a demonstration performed using on-site front-end electronics, specifically involving Belle II TOP and KLM subdetectors.Keywords
All Related Versions
Funding Information
- Grants-in-Aid for Scientific Research—KAKENHI—JSPS International Research Fellow (18F18324)
This publication has 13 references indexed in Scilit:
- Common Readout Subsystem for the Belle II Experiment and Its Performance MeasurementIEEE Transactions on Nuclear Science, 2017
- Common Readout Unit (CRU) - A new readout architecture for the ALICE experimentJournal of Instrumentation, 2016
- Data Acquisition System for the Belle II ExperimentIEEE Transactions on Nuclear Science, 2015
- Observation of a new particle in the search for the Standard Model Higgs boson with the ATLAS detector at the LHCPhysics Letters B, 2012
- Belle2Link: A Global Data Readout and Transmission for Belle II Experiment at KEKPhysics Procedia, 2012
- Timing distribution for the Belle II data acquistion systemJournal of Instrumentation, 2012
- Level 1 Trigger System for the Belle II ExperimentIEEE Transactions on Nuclear Science, 2011
- Data acquisition system for Belle IIJournal of Instrumentation, 2010
- Modular pipeline readout electronics for the SuperBelle drift chamberIEEE Transactions on Nuclear Science, 2005
- Network shared memory framework for the BELLE data acquisition control systemIEEE Transactions on Nuclear Science, 2000